Daewoo DASD-S18
Before commissioning Daewoo DASD-S18, record the old drive's alarm history, parameters, motor nameplate, braking circuit, encoder connection and machine-control interface.
For Daewoo DASD-S18, check the complete drive label and suffix, machine-axis duty, motor and feedback connection, control connectors and the existing parameter backup together. A servo drive is not a servomotor, encoder cable or passive accessory.
The power label alone is insufficient when replacing Daewoo DASD-S18. Hardware revision, two-axis construction, an SPX/SPZ/SPC suffix or the SPEA designation can identify a different connection and control implementation within the family.
Daewoo DASD-S18 is written for identifying the correct legacy servo drive during machine service. Daewoo DASD-S18 belongs to the Daewoo Pro-Motion DASD-S / SPEA drive scope. Read S05, S08, S13, S18, S29 and S44 labels separately from the S05 SPEA subvariant.
For Daewoo DASD-S18, Daewoo Pro-Motion DASD-S / SPEA servo drives, Daewoo DASD-S05 and Daewoo DASD-S08 separate the series from its label variants.
During Daewoo DASD-S18 service, Daewoo DASD-S13, Daewoo DASD-S29 and Daewoo DASD-S44 help compare hardware boundaries across drive families.
Technical selection boundary for Daewoo DASD-S18
The technical boundary for Daewoo DASD-S18 is the Daewoo Pro-Motion DASD-S / SPEA family and its documented DASD-S05 / S08 / S13 / S18 / S29 / S44; SPEA labels. Exact replacement selection follows the complete drive label, machine duty and connection set.