ePAD30
ePAD30 is an operator panel identified by its complete hardware code in the ePAD Large Panel family. Its project handles machine status, alarms and controls; replacement depends on the nameplate and connections as well as the visible screen.
Match the supply, port layout and cabinet cut-out of ePAD30 against its nameplate and technical drawing. Compare connector orientation and mounting dimensions with the installed panel.
On large ePAD panels, retain the T and C suffixes; the C variant documented around 2012 is treated as distinct hardware. Screen size alone does not establish mechanical or project compatibility. Use the complete ePAD30 code when selecting within this family.
What matters on the installed machine?
The display arrangement of ePAD30 must be checked on the installed nameplate and front panel. Compare ePAD30T before deciding on a substitute. Matching a plug does not preserve the operator’s screen and key layout.
For ePAD30, verify the Designer / Designer 6 release, protocol option and whether the archived project opens. A related code such as ePAD30T does not establish the same software target.
Record the current display behavior before changing ePAD30. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.
Around ePAD30, compare ePAD31, ePAD31T and ePAD32. Check each complete code and connection on its own page.
PDF manuals
Documents include UniOP Installation Guide v1.09. For ePAD30, match the full code and hardware period against ePAD Large Panel PDF Manuals.