CP11G-04

CP11G-04 is the 120×32 graphic LCD; key-operated operator panel in the UniOP CP family. Its project handles machine status, alarms and controls; replacement depends on the nameplate and connections as well as the visible screen.

The recorded display or hardware distinction for CP11G-04 is 120×32 graphic LCD; key-operated. Match the supply, port layout and cabinet cut-out of CP11G-04 against its nameplate and technical drawing. Compare connector orientation and mounting dimensions with the installed panel.

UniOP CP covers text and small graphic operator panels. Verify the complete model and suffix together with display type, keypad and installed protocol module. Use the complete CP11G-04 code when selecting within this family.

What matters on the installed machine?

CP11G-04 has the recorded 120×32 graphic LCD; key-operated arrangement; check that the operator screens fit this display. Compare CP01F-02 before deciding on a substitute. Matching a plug does not preserve the operator’s screen and key layout.

For CP11G-04, verify the Designer / Designer 6 release, protocol option and whether the archived project opens. A related code such as CP01F-02 does not establish the same software target.

Record the current display behavior before changing CP11G-04. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.

Around CP11G-04, compare CP01R-04 (4×20 character LCD; key-operated), CP02F-02 and CP02R-04 (4×20 character LCD; key-operated). Check each complete code and connection on its own page.

PDF manuals

Documents include UniOP Installation Guide v1.08, UniOP OEM installation guide. For CP11G-04, match 120×32 graphic LCD; key-operated details against UniOP CP PDF Manuals.