How do I pair Bluetooth devices?

How do I pair Bluetooth devices?

Set up the first connection in the right order

Hello, the usual Bluetooth pairing sequence is to prepare the accessory, enable pairing mode, select the correct device and complete the requested verification. Then test the function you intend to use. Menu names vary between phones, computers and accessories; follow the product's own instructions.

A direct Bluetooth pairing does not require joining a Wi-Fi network. However, the manufacturer's app may require internet access for downloading, account registration or another part of setup.

Prepare the accessory for pairing

Switch on both devices, enable Bluetooth and check that sufficient battery power is available. Battery and power conditions can affect connections, particularly on small battery-powered products. Keep the devices close together during setup; this test distance does not define the product's overall Bluetooth range.

Put the headphones, speaker or keyboard into pairing mode. This may involve a dedicated button, holding the power button or starting a procedure in an app. Button timing, indicator colors and menus are not universal. If the accessory automatically connects to another device, temporarily disconnect that connection.

Select the device on Android, iPhone/iPad or Windows

Android: Open Connected devices or Bluetooth in Settings. Choose Pair new device, select the accessory from the results and follow the prompts. Google Pixel provides these controls through its Connected devices and Bluetooth menus; names and layout can differ on other brands.

iPhone and iPad: Open Settings, Bluetooth and enable Bluetooth. Select the accessory when its name appears in pairing mode. If requested, enter the PIN or passcode according to the manufacturer's instructions, then check the connection status.

Windows 11: Enable Bluetooth under Settings, Bluetooth & devices. You can open the taskbar's network/sound/battery panel, select the Bluetooth device-management control and choose the accessory under New devices. Complete any verification prompts. The computer needs Bluetooth hardware and an appropriate driver; supported accessories can also use a Swift Pair notification.

Entering a passcode and comparing numbers are different methods

If asked to compare numbers, check that the numbers shown on both screens match before confirming. If asked to enter a code, type the number displayed by one device into the input specified on the other. With a Bluetooth keyboard, you may need to type the code on the physical keyboard being paired and press Enter; follow the displayed instructions.

Some products pair without displaying a code to the user. This does not mean that every product uses the same security method. For an older accessory requiring a fixed PIN, consult its manual; there is no single default code for all devices. For Bluetooth security, accept only requests you initiated and verified as belonging to the intended device.

Editor's note: Pairing establishes and exchanges security keys. Storing keys for future connections is called bonding. A “Paired” entry alone does not mean that the accessory is currently connected or ready to perform the intended function.

Bluetooth LE products may require an app

Some Bluetooth LE sensors, measuring instruments and trackers are discovered through the manufacturer's app. Where the manual specifies this method, open the app, start its device scan and select the correct product. Not every LE device must first be added to the phone's general paired-device list; some data exchanges do not require pairing.

Check Nearby devices permission on Android and any other permissions the app requires. Requirements depend on the operating system and app version. An iOS/iPadOS app may likewise require Bluetooth access. Do not enable unrelated permissions simply to make pairing work.

Verify the connection by testing its actual function

Play a short audio clip through headphones and select the correct audio output. Type a few characters on a keyboard. For a measuring instrument, check that current readings reach the app. Success depends on the intended application; seeing a device name in a list is insufficient.

When connecting industrial equipment to a PLC or automation system, also verify the application protocol, data format and any required gateway. Successful pairing with a phone does not establish that compatibility.

If the device is missing or will not reconnect

Check that pairing mode is still active, the accessory has not remained connected elsewhere and the correct app is being used. Turn Bluetooth off and on; restart the devices if necessary. If a saved pairing is causing trouble, use Forget/Remove for that device and try again. See our Bluetooth troubleshooting guide for further steps.

Many accessories reconnect automatically to a saved device, depending on connection priorities and simultaneous-connection support. Repeating the pairing process at every startup is not a mandatory part of normal use.

Related guides: How Bluetooth works, Bluetooth versions and compatibility, Bluetooth versus Wi-Fi, secure Bluetooth use.

Related sections: Main Bluetooth guide, remote control systems, remote control accessories.