Contactor Prices

Compare suitable models on the same technical basis

Contactor prices vary with brand, range, utilization category, rated current, coil type and included accessories. A useful comparison starts with products capable of performing the same duty. Browse the contactors category for model options or the Siemens contactors section for that brand. Assess current price, availability and delivery against the selected product or quotation.

Editor’s note: A contactor can carry both an 18 A AC-3 rating and a 32 A AC-1 rating. These describe different load conditions. Comparing a device needed for an 18 A AC-3 motor application solely as a “32 amp contactor” can lead to the wrong selection. Match the utilization category before comparing prices.

The main specifications that affect price

Current and motor power: When researching 9 A, 12 A, 18 A, 25 A or 32 A models, check the operating voltage and utilization category associated with that current rating. AC-1 covers non-inductive or slightly inductive loads; AC-3 covers normal starting and switching off running squirrel-cage motors. A catalogue kW rating also relates to a specified voltage. Motor power alone does not establish suitability for every duty.

Coil voltage and technology: A 24 V DC coil, a 230 V AC coil and a wide-range electronic coil are different options. This voltage belongs to the control circuit; the voltage switched by the main contacts is a separate specification. AC/DC compatibility, coil consumption, surge suppression and electronic control features can change both the order code and price. Wide-range operation is a model-specific feature.

Poles and auxiliary contacts: Three-pole and four-pole contactors serve different requirements. Main power contacts must also be distinguished from auxiliary contacts. If you need 1 NO + 1 NC, compare the cost of a device with these contacts built in against a base device requiring an additional module. NO means normally open; NC means normally closed.

Standard devices and additional features

Compact dimensions, low coil consumption, electronic coils, connection technology and accessory compatibility can influence the purchase price. Screw, spring-clamp and push-in versions may have different full order codes within the same range. Assess their value against panel space, installation time, control power requirements and maintenance needs.

For control from a PLC output, check the coil’s pull-in and holding consumption. Include an interposing relay and socket where required. A 24 V DC coil is not automatically suitable for direct connection to every PLC output. Similarly, control buttons and other switchgear accessories are separate items in the complete circuit cost.

A contactor price versus the cost of a complete circuit

Is the overload relay included? A contactor switches the circuit; it does not, by itself, provide motor overload or short-circuit protection. The application requires coordination with an overload relay, suitable fuses or an appropriate thermal-magnetic circuit breaker. A starter assembly containing protective devices cannot be compared directly with the price of a bare contactor.

Reversing and star-delta assemblies add costs for the required contactors, mechanical and electrical interlocking, connection kits and timing components. Two separately purchased contactors do not constitute the same package as a complete interlocked reversing assembly. A quotation should state exactly which components are included.

Comparing brands and product ranges

When comparing Siemens, Schneider Electric, ABB, Eaton or another brand, first match the utilization category, operating voltage, coil supply and contact arrangement. Within families such as Siemens contactor ranges, dimensions and accessory compatibility also matter. For a replacement, matching the current rating is insufficient: mounting, terminal layout and the control circuit must be compatible too.

Cost-effective selection means meeting the actual specification while considering the device, additional components and installation together. Confusing the difference between a relay and a contactor can introduce a cheaper but unsuitable device into the comparison.

Information needed for an accurate quotation

Provide the complete existing part number or a readable nameplate photograph, load type, operating voltage, motor nameplate current, coil supply, pole count, required auxiliary contacts and quantity. For example, “400 V three-phase motor, 15.2 A nameplate current, normal starting duty, three poles, 24 V DC coil and 1 NO + 1 NC auxiliary contacts” is clearer than asking only for a “7.5 kW contactor”. Final selection must follow the manufacturer’s selection data.

Match the commercial terms as well: VAT inclusion, currency, quantity discounts, freight, delivery time and quotation validity can affect the final amount payable. Make the decision using a current quotation for the full product code.

Products and related categories

Contactor models; Auxiliary contacts; Overload relays; Switchgear.