DA200 750 watt Servo Set without brake

750 watt Set Content :

SV-DA200-0R7-2-E0               : 750 watt SERVO DRIVE 220 Volt
SV-ML08-0R7G-2-9A0-1000  : 750 watt SERVO MOTOR WITHOUT BRAKE
DAML-075-05-CB0-00            : ENCODER CABLE 5 MT
DBEL-06-05-CD-0400             : POWER CABLE 5 MT


INVT DA200 DRIVE SPECIFICATIONS :

- 1 Faz 220VAC Power Suply
- 10 Input / 6 Output (Programable)
- 3 Analog Input ( 1 point 16bit / 2 point 12bit )
- 2 Analog Output
- USB Input (PC Software)
- RS 485 Standard . CanOPEN, PROFINET, EtherCAT optional .
- Safe Torque Off ( STO ) Optional
- Position Control ,Speed Control, Torque Control Modes
- 2kHZ Speed Response Frequency
- 23 bit absolute encoder
- Full Closed loop function
- Build-in positioner function
- Electronic CAM function
- Linear motor Control
- Online and offline load inertia detection
- Auto/ manuel notch filter
- Gantry control function
- Easy installation with user friendly pc software

DA200 Servo Motor Technical Specifications :

ENCODER TYPE                : 23-BIT ABSOLUTE ENKODER
POWER                              : 750 Watt
RATED TORQUE                : 2.4 NM
MAXIMUM TORQUE         : 7.2 NM
RATED CURRENT              : 4.5 A
MAXIMUM CURRENT        : 13.5 A
RATED SPEED                     : 3000 RPM
MAXIMUM SPEED              : 5000 RPM
PROTECTION CLASS           : IP65
OIL SEAL                               : Available
KEYWAY                                : Available
FLANGE MEASUREMENT    : 80 mm
SHAFT DIAMETER                 : 19 mm
LENGHT WITHOUT SHAFT   : 140 mm
LENGHT WITH SHAFT           : 175 mm

Attention ; Lowest power servo in our webshop is 750 watt

    - 750 watt Servo Set With brake >

    - 750 watt EtherCAT Set >

    - Suitable gearbox for this motor (750 watt) >

    - One size higher servo (1 KW) >

- İnvt servo Main Page -

- İnvt Main Page -

+ 750 watt Servo motor drawings (pdf)

+ İnvt DA200 Servo user manual >

+ İnvt servo error codes and solutions >

+ Servo instolation and useful documents >

+ İnvt servo PC software (zip)