Gemo temperature and timer controls

Hello,

Gemo time + temperature control devices and

Profile controllers

- Multi-input double contact temperature with internal time relay,

- Selectable sensor type: T/C (J,K,S,R,T), Pt-100 !

- Auto-tune PID feature! Auto-tune PID,

- Anti-windup” feature !

- P, PI, PD, PID or ON-OFF control form,

- Automatic "Overshoot" inhibition in PID mode !

- Possibility to select upper and lower limit for set value,

- Internal Timer (99:59 hours) - ALARM output !

- Adjustable ON time (99:59min) for ALARM output

- Possibility to monitor Set and Process values at the same time

- Multi-Input dual contact temperature step (profile) controller

- Selectable sensor type: T/C (J,K,S), Pt-100

-PID feature ! ! Anti-windup feature

- P, PI, PD, PID or ON-OFF control form ! ! 20 steps max.

- Max. 18 hour time definition

- Reserve feature; available when the supply is interrupted ! saves step and remaining time in memory, power
when applied again, if the measured temperature is in the user-defined zone, it will continue from where it left off.

- Possibility to choose relative or absolute alarm

- Intermittent monitoring of Set, Step, Remaining Time and Process values

- Ambient temperature compensation for T/C !

- Line compensation for Pt100 (3-wire connection)

- Curve correction with memory-stored C/mV, C/R conversion tables

- Possibility to add "Offset" to the measurement value

- Data security with encrypted login

- Detection of sensor failures

- High sensitivity, accuracy

Dear members, since there are many controller models;

For example, if the device you are going to buy has a 24v supply or if it has a ssr output, you must specify this information when ordering. Otherwise, it causes unnecessary cargo/phone/mail traffic.

We have technical support for the products purchased from our company for gemo control devices. Below you can find devices with many features and sizes.