Gemo AR2-P-24VDC-10D2A PLC / Smart Relay is a compact, expandable controller designed for industrial automation and machine control applications. This 24 VDC version provides 10 digital inputs, 2 analog inputs and 7 relay outputs in the standard configuration.
Gemo AR2-P series controllers have been supplied through our website since 2011.
Gemo AR2-P-24VDC-10D2A standard I/O configuration
• Supply voltage: 24 VDC
• Digital inputs: 10 × 24 VDC inputs
• Analog inputs: 2 × 0-10 V analog inputs. The inputs can also be used with 4-20 mA signals when configured appropriately.
• Analog output: Not available.
• Relay outputs: 7 × 2 A relay outputs
• Real-time clock: Not included in this model.
• Temperature sensor input: 1 × PTC sensor input
• EMC and panel installation: The internal electrical isolation allows the controller to operate in control panels containing equipment such as AC motor speed controllers / VFDs, frequency inverters and other possible sources of electrical interference. Correct grounding, shielding and panel wiring practices should still be followed.
• PID control: The AR2-P has no built-in PID algorithm. Applications requiring PID control should use an appropriate PLC or external control solution.
• Pulse output: This model does not provide a dedicated positioning pulse output for direct servo or stepper system control. A stable 1 ms output is available for timer functions.
• Can an HMI or operator display be connected? Yes. Compatible displays and operator panels can be connected to the controller. See HMI options for Gemo PLC controllers.
Main features of the Gemo AR2-P PLC / Smart Relay
• Digital input filter time: Minimum 8 ms for ON → OFF and OFF → ON transitions
• Programming language: Ladder logic with 256 program lines, 5 contact columns and 1 output column
• Edge functions: Rising-edge and falling-edge detection for contacts
• Programming interface: Program transfer through RS-232 cable
• Power consumption: Maximum 6 W
• Digital relay outputs: Maximum 250 VAC / 2 A with resistive load
• Analog input expansion: Expandable to 4 × 0-10 V analog inputs
• Counter comparators: 32 counter comparator functions with offset capability
• Menu system: Three-level password-protected menu structure
• Operating temperature: 0°C to 50°C
• Expansion module communication: RS-485 interface
• Terminal tightening torque: Maximum 0.5 N·m
• Digital input capacity: Expandable to 28 digital inputs with input filtering functions
• Weekly / annual scheduling: Available on AR2 configurations equipped with a real-time clock. This standard 24 VDC model does not include RTC.
• EMC compliance: EN 61000-6-1 and EN 61000-6-3 for light industrial environments
• Digital output capacity: Expandable to 20 digital outputs
• Display functions: Up to 32 display pages with four sub-screens each
• Timer functions: 32 timers with 11 operating modes and 9 selectable time ranges
Electrical and technical specifications
• Protection class: IP20 according to EN 60529
• Relative humidity: Up to 80% at 30°C, decreasing linearly to 50% at 50°C. Non-condensing conditions required.
• A/D resolution: 10 bit
• Fast counter input OFF time: Minimum 1.25 ms
• RS-485 cable: Twisted, shielded, 2-core, 24 AWG cable. Connections should be made A ↔ A and B ↔ B.
• Analog inputs: 0-10 VDC, maximum 16 VDC, with a separate analog ground.
• Timer accuracy: ±0.1% of preset value or 1 digit, whichever is greater.
• PTC input: 2-wire PTC sensor input, approximately -50°C to +150°C range
• Fast counter input ON time: Minimum 1.25 ms
• Front panel controls: 3 programmable F keys with filtering functions
• Startup display: Four-sub-screen startup display suitable for logo presentation
• Ladder scan time: Maximum 10 ms
• Analog comparators: 16 hysteresis-enabled analog comparator functions
• Counters: 32 counters, 16-bit, selectable up/down counting
Gemo AR2-P software, manual and related information
• Gemo AR2 PLC User Manual – English PDF manual
• Gemo Ladder Editor PLC programming software – Version 2.4 ZIP package
Important safety notice
Installation, wiring and commissioning of the Gemo AR2-P PLC / Smart Relay should be carried out only by qualified technical personnel. Installation must comply with applicable machinery and electrical safety requirements, including 2006/42/EC where applicable, together with the regulations in force at the installation location.
Otomasyon AVM cannot accept responsibility for installations that violate applicable local laws or other regulations. Failure to follow the installation and operating instructions supplied by GEMO may result in equipment damage or conditions that are not covered by the product warranty.
Further installation, programming and operating information is available in the product manual. For technical assistance, contact gemo@otomasyonavm.com or visit the Gemo contact page.
Gemo AR2-P-24VDC-10D2A
- Mağaza: Efes Otomasyon
- Store: Efes Automation
- Brands GEMO
- Product Code: Gemo AR2-P-24VDC-10D2A
- Availability: 12
-
110.00USD
- Ex Tax: 110.00USD
Related Products
DLC-R1410-R-A
DERELL DLC-R1410-R-A is a programmable logic relay. It is used in smaller automation applications re..
100.00USD Ex Tax: 100.00USD
DLC-R1410-R-B
DERELL DLC-R1410-R-B is a programmable logic relay. It is used in smaller automation applications re..
100.00USD Ex Tax: 100.00USD
DLC-R1410-GR-B
DERELL DLC-R1410-GR-B is a programmable logic relay. It is used in smaller automation applications r..
100.00USD Ex Tax: 100.00USD
DLC-R1410-GR-A
DERELL DLC-R1410-GR-A is a programmable logic relay. It is used in smaller automation applications r..
100.00USD Ex Tax: 100.00USD




