DERELL REP 37-E-220 is an economical series digital/electronic potentiometer with dimensions of 37*72 mm and a 220V power supply input.
It is a user-friendly device that can increase or decrease the output analog value (DC 0-10 volts) through digital keys. The output voltage value can be proportionally adjusted according to the condition of your machine with a one-to-one or optional multiplier value.
This product is usually used for the speed control of speed control devices. It not only adjusts the speed but also has parameters for setting the output value on and off when energy is first supplied, as well as ramp-up times.
The low and high-speed levels can be controlled from the device by defining the output voltage limits.
The device can store the last point it was set to before an electrical outage and continue from where it left off or can be started from zero with a ramp-up feature.
The energy supply voltage of the device may vary from model to model. The products sold in domestic markets are produced as 12vDC, 24vDC, and 220vAC.
REP electronic potentiometer and analog control device are designed for industrial machine environments. They have galvanized insulation and can work alongside potential parasite-emitting products such as power supplies, frequency inverters, servo drivers, etc., which are located on the same panel.
Power supply: 230VAC (+10% ~ -20%) 50/60Hz, 24VOLT DC, 12 VOLT DC
Box Dimensions: 35mm x 77mm x 75mm and 72mm x 72mm x 75mm
Display: 1 x 3-digit 14mm LED Display, 4 digits for 72*72 models
Keypad: 4 micro switches
Operating Temperature: 0 ~ 50 oC
Output Voltage: 0 ~ 10VDC (20mA max.) // See "P" model for 4-20mA
Scale Range: -199 ~ 800
Max Output Current: 10mA
Output Voltage Resolution: 1/10,000
Protection (keypad part): IP65
Operating Humidity Level: 10% - 90% (without condensation)
External digital input for speed control: None (see REP series "S" model for this feature)
Relay outputs: None (see REP series "P" model for this feature)
Note that this device cannot be used as an adjustable power supply. Its purpose is solely to adjust the reference of speed control devices. Do not connect any other receiver or load to its output.
The new version of this product is DTP-37.
If you are looking for a classic wired potentiometer, click here.
For digital potentiometers homepage, click here.
Note that this series is an old model kept for backup purposes only, and similar products are recommended for new projects below.
It is a user-friendly device that can increase or decrease the output analog value (DC 0-10 volts) through digital keys. The output voltage value can be proportionally adjusted according to the condition of your machine with a one-to-one or optional multiplier value.
This product is usually used for the speed control of speed control devices. It not only adjusts the speed but also has parameters for setting the output value on and off when energy is first supplied, as well as ramp-up times.
The low and high-speed levels can be controlled from the device by defining the output voltage limits.
The device can store the last point it was set to before an electrical outage and continue from where it left off or can be started from zero with a ramp-up feature.
The energy supply voltage of the device may vary from model to model. The products sold in domestic markets are produced as 12vDC, 24vDC, and 220vAC.
REP electronic potentiometer and analog control device are designed for industrial machine environments. They have galvanized insulation and can work alongside potential parasite-emitting products such as power supplies, frequency inverters, servo drivers, etc., which are located on the same panel.
Power supply: 230VAC (+10% ~ -20%) 50/60Hz, 24VOLT DC, 12 VOLT DC
Box Dimensions: 35mm x 77mm x 75mm and 72mm x 72mm x 75mm
Display: 1 x 3-digit 14mm LED Display, 4 digits for 72*72 models
Keypad: 4 micro switches
Operating Temperature: 0 ~ 50 oC
Output Voltage: 0 ~ 10VDC (20mA max.) // See "P" model for 4-20mA
Scale Range: -199 ~ 800
Max Output Current: 10mA
Output Voltage Resolution: 1/10,000
Protection (keypad part): IP65
Operating Humidity Level: 10% - 90% (without condensation)
External digital input for speed control: None (see REP series "S" model for this feature)
Relay outputs: None (see REP series "P" model for this feature)
Note that this device cannot be used as an adjustable power supply. Its purpose is solely to adjust the reference of speed control devices. Do not connect any other receiver or load to its output.
The new version of this product is DTP-37.
If you are looking for a classic wired potentiometer, click here.
For digital potentiometers homepage, click here.
REP-37-E-220 digital/electronic potentiometer
- Mağaza: Efes Otomasyon
- Store: Efes Automation
- Brands DERELL
- Product Code: REP-37-E-220
- Availability: 17
-
300.00USD
- Ex Tax: 300.00USD
Related Products
DTP-37A electronic potentiometer
The DTP-37A is an electronic potentiometer that has a 220-volt power supply and a size of 37x72 mm. ..
255.00USD Ex Tax: 255.00USD