Are there wireless datalogger devices?

Wireless logging: choose the connection around the measurement

Yes—wireless data loggers are available. They can use Bluetooth, Wi-Fi, cellular communications or dedicated radio networks to transfer readings. The useful distinction is how you retrieve the records: walk up with a phone, collect them through a gateway, or receive them automatically on a server. The core data logger job remains measurement, timestamping and storage.

Wireless communication does not mean wireless power. A logger may use replaceable batteries, a rechargeable pack or an external supply. Its probe may still have a cable. Also check that the device actually stores readings: a sensor that only broadcasts its latest value is not necessarily a standalone recorder. Our guide to how logging works explains the recording side.

Four ways to get the readings out

Connection Typical arrangement Check before choosing
Bluetooth / BLE Configure and download with a nearby phone. Automatic remote collection may need a compatible gateway.
Wi-Fi Send readings through the site network to a server or cloud service. Supported band, network authentication and cloud requirements.
Cellular Send records from sites without fixed internet access. Carrier coverage, SIM/data plan and power budget.
LoRa-based / dedicated RF Connect distributed loggers to a compatible receiver. Gateway, regional frequency and protocol compatibility. LoRa hardware alone does not establish LoRaWAN compatibility.

Examples of actual products: Onset's HOBO MX1101 provides Bluetooth setup and data download. Testo's Saveris 2-T3 uploads through Wi-Fi to the manufacturer's cloud. Vaisala's RFL100 uses VaiNet, a proprietary LoRa-based network. These illustrate different architectures; they are not interchangeable network devices.

Downloading with a phone during a site visit is different from remote data access. For live monitoring, establish whether collection continues without a phone nearby. Integration with industrial IoT or SCADA also needs a supported data interface; a wireless radio by itself does not provide software compatibility.

Separate logging from uploading

Local storage and automatic backfill allow a suitable logger to retain readings during a communication outage and transfer them later. Do not assume every wireless sensor includes these features. Vaisala, for example, specifies local recording and automatic transmission after communications return for its RFL100. Check memory capacity, the stop-or-overwrite setting and remaining battery power as well.

Consider a cold-room installation: it records once a minute but uploads every ten minutes. During a two-hour internet outage, a device with independent local recording could retain 120 timestamped measurement sets. Its cloud-based alert may arrive late, however. Preserving the history does not guarantee timely notification. When configuring a logger, set the measurement interval, upload interval and alarm behaviour separately.

Battery life and range need operating conditions

Frequent measurements and radio activity can shorten battery life. The result depends on the sensor, ambient temperature, upload traffic and connection retries. Compare power options against the conditions behind the manufacturer's battery-life figure. Include battery replacement and communication checks in the maintenance plan.

A range figure is not a site guarantee. Steel cabinets, concrete walls, insulated cold-room panels and antenna placement can change reception. Test the intended mounting position with doors closed and equipment operating. Environmental durability and radio coverage are separate requirements. Wireless transport does not improve measurement accuracy; the sensor type, placement and calibration still determine whether the readings are useful.

Match the instrument to the job

Warehouses, greenhouses, cold rooms and temporary surveys are useful logging applications where wiring can be awkward. Across different industries, start with the measured quantity, channel count and required sampling rate. A routine temperature logger may be unsuitable for high-speed vibration or electrical waveform capture, even if its wireless connection is convenient.

Budget for the complete system: probes, gateways, calibration, batteries, cellular service and cloud subscriptions can all affect ownership cost. For later data analysis, check CSV export, timestamp handling and access to historical records. The right logger captures trustworthy readings and delivers them when your application needs them.

Manufacturer references: Onset HOBO MX1101 · Testo Saveris 2-T3 · Vaisala RFL100 · Campbell Scientific cellular communications