ATEX, IECEx and Explosive Atmosphere Standards

ATEX, IECEx and Explosive Atmosphere Standards
Explosive atmosphere safety addresses the risk of a flammable gas, vapour, mist or dust mixture in air encountering an ignition source. Motors, sensors, junction boxes and mechanical equipment may require assessment for electrical sparks, hot surfaces, friction or static electricity. ATEX, IECEx certification and IEC 60079 standards are frequently discussed together, but they perform different roles.
Editor's note: ATEX is a regulatory framework; IECEx is a certification system; IEC/EN standards define technical requirements. Saying “complies with the ATEX standard” does not establish the atmosphere, protection level or conditions for which a product is suitable. The image is an illustration of the topic.
How do ATEX, IECEx and IEC/EN differ?
| Term | Main role | Information to check |
|---|---|---|
| ATEX | EU product and workplace regulatory framework | Relevant directive, conformity documents and conditions of use |
| IECEx | International certification based on standards | CoC scope, status and links to ExTR and QAR records |
| IEC / EN | Construction, testing, marking and installation requirements | Applicable standard, edition and protection technique |
ATEX product and workplace responsibilities
2014/34/EU sets product requirements for equipment and protective systems intended for potentially explosive atmospheres. It replaced the former 94/9/EC ATEX Directive. 1999/92/EC addresses workplace duties, including worker protection, explosion risk assessment, hazardous area classification and the explosion protection document. Purchasing compliant equipment does not establish the safety of the complete installation.
ATEX equipment groups and categories identify intended use and protection level. G denotes gas, vapour and mist; D denotes combustible dust. Conformity assessment procedures depend on equipment type and category; the same third-party certificate is not required for every ATEX product. Review the EU Declaration of Conformity, markings and instructions against the applicable product requirements.
What does an IECEx certificate establish?
The IECEx Certified Equipment Scheme operates through approved Ex Certification Bodies (ExCBs) and Ex Test Laboratories (ExTLs). For serially manufactured equipment, an Ex Test Report (ExTR) supports the technical assessment, while a Quality Assessment Report (QAR) supports assessment of the manufacturing quality system. Satisfactory results enable issue of a Certificate of Conformity (CoC), with continued manufacturing surveillance.
Verify the certificate number through the official IECEx online records. Compare the model, revision, Ex marking, ambient temperature and specific conditions of use with the actual product. A component certificate cannot substitute for certification of the complete equipment. An IECEx certificate does not automatically fulfil EU ATEX obligations; the destination country's requirements must also be assessed.
Which standards apply at each stage?
IEC 60079-0 covers general construction, testing and marking requirements for Ex equipment and components. IEC 60079-10-1 addresses gas area classification, while IEC 60079-10-2 addresses combustible dust area classification. IEC 60079-14 concerns electrical installation design, selection, installation and initial inspection; IEC 60079-17 addresses inspection and maintenance during operation.
IEC 60079-25 addresses intrinsically safe electrical systems, and IEC 60079-31 addresses dust ignition protection by enclosure. ISO 80079-36 and ISO 80079-37 are also relevant to ignition hazards in non-electrical equipment. A pump or gearbox without an electrical supply can still present an ignition hazard.
An IEC edition and an EN harmonised standard listing are different records. For EU conformity assessment, check the applicable EN standard's status, restrictions and transition dates in the official harmonised standards list. Publication of a new IEC edition does not automatically make it harmonised under ATEX.
How do Ex protection techniques differ?
Ex protection techniques and markings describe different technical solutions. Ex d flameproof enclosure, Ex e increased safety, Ex i intrinsic safety, Ex m encapsulation, Ex p pressurisation, Ex q powder filling and Ex t dust ignition protection are not interchangeable. Not every Ex device is flameproof. The applicable protection level depends on the technique's detailed marking and product documentation.
How should the marking and location be assessed together?
Classify the area before selecting equipment. Consider Zone 0, Zone 1 and Zone 2 for gas, and Zone 20, Zone 21 and Zone 22 for dust. Read the complete Ex marking together with the gas/dust group, Equipment Protection Level (EPL), temperature class or surface temperature limit and permitted ambient temperature. Gas approval does not replace dust approval.
Certificates with an X suffix require review of specific conditions of use. Cable glands, connections, earthing and installation must also suit the protection technique. A high IP rating alone does not establish explosion protection conformity. Maintenance changes to enclosures, connections or circuits can affect Ex protection; apply the product instructions together with the installation's maintenance arrangements.