DEIP-99-R-A Digital / Electronic Indicator
Supply voltage: 220V AC
Output type: 1 relay
Input type: 0-10V, 4-20mA (also 0-20mA)
Display: 4-digit (+4000, -4000), Panel size: 96mm × 96mm
0.00
Simulation: The display below simulates the response of the indicator based on the 0–10V or 4–20mA input signal. The relay output is activated when the signal reaches the set threshold.
Input Signal (0–10V)
+ This is a general-purpose electronic display that allows you to calibrate and view analog values. Supported signals include:
- Compatible with universal 4-20mA or 0-10V sensors- Adjustable scale for sensor readings
- Relay output available for control based on SET value
- Voltage output available for sensor power (12VDC unregulated, max 20mA)
- Adjustable decimal point display
- LED display (12mm, 4-digit) with special icons
- IP65 rated front panel (dust and water resistant)
- Fixed terminal connection
- Panel mounting via claw clamps
+ (0-10V) > Typically used for speed controller analog outputs, but can measure all 0–10V DC signals. Can be directly connected to inverter potentiometers.
+ (0-1V) > Can be used for load-cell or humidity indicators. Suitable for reading very low voltages.
+ (4-20mA) > Reads analog outputs from inverters or other industrial sensors.
In your machine applications, speed, current, and torque can be monitored via the analog outputs of AC drives. Operator panels may not always be accessible — this display provides a compact solution.
Standard screen calibration is available across all models.
Optional features:
- 3, 4, or 6-digit or LCD screen options
- Decimal point configuration
- Memory for minimum and maximum values
- May vary depending on the model:
* Calibrated analog output (0-10V)
* RS485 Modbus communication support
* Programmable relay output
* Internal power supply for sensor powering
* Dual mode (dual analog input)
* Direct PC connection
* USB data logging support
* Customizable LCD display (bar, RPM text, etc.)
++ DEIP series controllers are designed for use in industrial panels and are protected against electromagnetic interference from power supplies, frequency inverters, servo drives, etc. via galvanized isolation.
- DGI-99-R-B model with 24VAC/DC supply
- Smaller version: note: possibly 37×72
- Larger version: DEIP-77-R-A (72×72)
- For dual-relay and dual-line models, check out the DGI series
- These devices are used to read current speed, not to adjust speed on AC drives.
- For speed control, see: Electronic Potentiometer
[User Manual (PDF)]
Editor's Note: This is one of the most popular digital indicator models in the market. It has been widely used in speed monitoring, pressure gauges, angle meters, length and distance indicators, ammeters, etc. It operates reliably and its relay output is one of the strongest advantages — allowing you to activate alarms or triggers when preset thresholds are reached. It’s ideal for operators due to its remote readability. Highly recommended.
Attention please !! All assembly operations for DERELL DEIP series indicators must be performed ONLY by qualified technical personnel. Installation must comply with all applicable laws and regulations, including 2006/42/EC. Otomasyon AVM assumes no responsibility for misuse or violations. Failing to follow DERELL Elektronik instructions may void your warranty. For support, contact: support@otomasyonavm.com
DEIP-99-R-A -Analog signal display with relay
- Mağaza: Efes Otomasyon
- Store: Efes Automation
- Brands DERELL
- Product Code: DEIP-99-R-A
- Availability: 6
-
324.00USD
- Ex Tax: 324.00USD