AJ65SBT-64AD

AJ65SBT-64AD: 4-Channel Analog Input Module

The AJ65SBT-64AD module from Mitsubishi’s MELSEC network series is a versatile analog input module with four channels, suitable for industrial applications that require precise analog signal measurement. Each channel can independently handle various voltage and current ranges, allowing adaptability across diverse sensor types and measurement needs.

Technical Specifications:

    Input Channels: 4 independent analog input channels.
    Supported Signal Ranges:
        Digital Output: -4000 to +4000 or 0 to 4000, depending on configuration.
        Voltage Inputs: -10V to +10V, 0V to 10V, and 1V to 5V, suitable for different industrial sensors.
        Current Inputs: 0mA to 20mA and 4mA to 20mA, with support for industry-standard current loop signals.
    Resolution and Accuracy: The module offers a resolution range to achieve accuracy within ±1.0%, ideal for applications demanding precise readings.
    Conversion Speed: High-speed data acquisition with a conversion time of 1 ms per channel at standard resolution, supporting rapid and accurate monitoring.

Supported CPUs and Programming Software:

    Compatible CPUs: Works seamlessly with MELSEC AnS and QnAS CPU modules, making it compatible with Mitsubishi's robust range of programmable logic controllers.
    Programming Software: The module can be programmed and configured using GX Developer and GX IEC Developer software. These tools provide ladder and instruction list programming modes, offline simulation, and diagnostics, making setup intuitive and efficient.

Installation and Wiring Recommendations:

    Isolation and Grounding: Ensure proper grounding for stable operation, and separate analog signal cables from power lines to reduce interference.
    Wiring Setup: Carefully connect each sensor to the designated input channel, adhering to the voltage and current ranges specified. Use shielded cables for enhanced signal integrity in noisy industrial environments.

Commissioning Notes and Maintenance Tips:

    Initial Calibration: Calibrate each input channel based on the specific sensor requirements to ensure accuracy.
    Regular Testing: Perform periodic checks on input accuracy, especially when switching ranges or after prolonged operation.
    Routine Maintenance: Inspect all connections and terminals to prevent signal degradation and confirm reliable communication across all channels.

This setup will ensure that your AJ65SBT-64AD operates at peak performance, supporting efficient data acquisition and integration within the larger MELSEC control system.


>> Mitsubishi AJ65SBT-64AD User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi AJ65SBT-64AD and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."