Advantys STB I/O


Schneider Electric's Advantys STB distributed I/O solution is an open and modular input/output system designed for machine manufacturers and users. The system is decentralized, meaning that automation islands are installed close to the machine, reducing the cost and time of wiring for sensors and actuators while increasing system availability. The system is based on electronic modules mounted on DIN rails, which are then connected to a master controller via a bus or communication network.

The Advantys STB system is compatible with a wide range of products, including motor starters, variable speed drives, and Magelis HMI terminals. Additionally, it can also be connected to third-party products via the CANopen bus, such as Festo, Parker valves, and ATV variable speed drives. Schneider Electric's Advantys software guides users through the design, start-up, and maintenance of the system, making it easy to use and maintain.

The Advantys STB distributed I/O solution is an open, modular input/output system that allows for the design of automation islands managed by a master controller via a bus or communication network. These islands can be used to connect various devices such as motor starters, variable speed drives, Magelis HMI terminals, and approved third-party products. The Advantys STB I/O family can be divided into two groups of modules: basic and standard.

The basic modules offer a complete set of low-cost modules and network interfaces with simplified operating modes, while the standard modules offer an extended offer of I/O modules with additional functions such as configurable parameters and extended operating modes. The Advantys STB distributed I/O has a protection rating of IP 20 and must be incorporated in protective casings with at least an IP 54 rating for installations in production workshops.