Economic Series 37kw (380Volt)
37 kw (380 v) for (fan and pumps) light applications
Dear members;
Our speed controllers for basic fan-pump style applications are included in this wide range.
These series, which are intended for lighter weights, are more suitable for long periods of work at constant torque and speeds. Loading, high performance coefficients are weaker than the standard speed control gear.
Attention please; Our drivers in this section are 50 hp / 37 kW speed control models with 3 phase (380 Volt) input and three phase output. The same speed controllers are also available in 1 phase input (220 Volt) and three-phase output models.
- If your motor has 220 volt phase and neutral input, the speed relays here are not suitable for you. There is no driver production for 220 volt motors in the market anyway.
What should you pay attention to in the enclosure of fans or machines?
Manual-auto mode;
No system planning for system planning for the drive can also be
started separately from the system for failure or testing. These
functions are distinctly user-friendly but doable.
PID Control Notifications;
PID control is essential for pump and fan control. In the flow
controller, a pressure gauge pressure control is done by feedback. Of
course, it is one of the signs of sleep function and load monitoring. Pid topic for more extensive options >>
PFC Control system; Must be included with PFC (pump and fan control) features for pump replacement and co-aging applications. Better about pump aging pump pumps can go through the pumping section.
Limiting features; For some applications, the engine speed should not exceed or drop above the values. Submersible pumps or hydrophores are the best examples
for this subject. For example, a pump that cannot produce power
obtained with 20 Hz frequency will not be able to flood at these speed
values and will cause mechanical electrical problems. This routing
should be done parameter setting; Minimum frequency = 25 Hz. In other
words, it should be able to work at 25hz or above at its condition at
the beginning of the pump. The same situation is in the maximum.
Ramp and dysfunction;
The motor applied in fan machines can continue to rotate or can be
painted as in the air conditioning fans areas. Usually, in some water
pumps, the engine can return after the external game. In this category,
our devices have the "recovery of rotary motion" function and the
"anti-knock" function for pumps.
Analogue input; Fan and pump devices must support many signal types.
0...20 mA 0...100%
4...20 mA 0...100%
-10...10 mA -50...50%
They should be able to create analog like -10v...+10v and should support at least one reproducible format. On the other hand, the pressure supply should be standard.
Energy-saving; One of the most important benefits expected from a pump or fan machine is that it saves energy. Of course, at this point, choosing the right mechanical organization and the right driver is the most important requirement. It is useful to review our energy saving article with ac speed controllers.
Fan controllers;
Fan motors for air systems are used to process 2 separate classification devices
1- Blowing
2- Suction
For
the fan to be able to change the variable system prices and increase
the air flow. If you are going to choose speed control for fan control,
validation is useful.
- How many hours will the fan be in operation?
- What is the kw/hour rate in your area?
- How much can your system checks be?
- Is the electrical suit important for its size?
- Do you need remote monitoring and intervention?
- Mechanical fan and motor noise important?
- Constant pressure or air required?
Clean Air circulation;
Air circus process fans anticipate your operations and the surrounding ambient air.
Powder Loading
A general dust collection item, especially for the in-plant passage and ventilation system.
transport
material, Industrial snails can do business such as sand, plastic
granule, plastic granule, window dressing, coating decoration and
packaging.
Saturated Air Fans
Such machines, which work more indoors, are used for moisture, smoke or biting.
High temperature
The
thermal medium is used in the glass and metal industry to neutralize
the tension accumulated on the material. In this direction, the drive
needs the guidance of another control path.
Medical or industries;
In
sensitive facilities such as hotels, hospitals or energy service use,
standard speed controllers are more prone to emit interference. If you
are projecting for such a place, HVAC drive models can be pumped for ventilation or applications.
Make sure your application Standard type speed controllers are useful on purpose.
Our instructional videos about commissioning and manuals in English.
-
Dear members, our website does not display products for the purpose of
finding a place. All products will be supported by the number of our
stocks, and if you are technically undecided, get it from your technical
staff.
-
-
-
-
-
-
-
