The 2-Wire Metric 12mm Proximity Sensor - NO Type is a sensor that detects metal and opens or closes the circuit depending on whether metal is present or not. In the example given, if the sensor does not detect metal, the connected contactor will not activate, and if metal is detected, the contactor will activate. The sensor operates within a 220 Volt AC voltage range and is wired in series with the circuit. It has a normally open output type (NO) and is made of stainless steel with a metric 12mm body diameter.
The sensing distance is 2mm, and the cable is 2 meters long with a wire diameter of 0.3mm. This sensor is only sensitive to metal and is suitable for use in industrial environments. It can be connected in series with a contactor or a relay with a voltage range of 220V to 24VAC. It is not suitable for use with small mini relays or time relays due to its low internal resistance. Finally, it operates quickly but does not support connections to electronic devices such as PLCs, counters, or tachometers. If you require this type of application, please consider our standard 3-wire inductive sensors.
The product being described is a 2-wire metric 12mm proximity sensor, specifically a normally open type that senses metal and switches the circuit off when metal is detected, and switches it on when metal is not detected. It operates within the voltage range of 220 volts AC and is wired in series with the circuit.
The sensor has a stainless steel body and a flat head with a diameter of 12mm. It has a detection distance of 2mm and a cable length of 2 meters with a wire diameter of 0.3mm. It is designed for use in industrial environments, such as factory panels, speed control devices, or power supplies with high noise emission potential.
However, it is not suitable for low-frequency, economical sensor models. The product page also includes information on other types of sensors available and emphasizes that installation and usage should comply with relevant regulations and laws, and should only be done by expert technical personnel.
| sensorler_1 | |
| açıklamalar | Bu ürün için firmamızdan teknik destek alabilirsiniz_IMB2-M12-W0 |
2 wire Metric 12 inductive NO- 220V
- Mağaza: Efes Otomasyon
- Store: Efes Automation
- Brands DERELL
- Product Code: M12M-BD2TO-2KH
- Availability: 242
-
50.00USD
- Ex Tax: 50.00USD
Related Products
2 Telli m12 İndüktif sensör NC -220V
M12M-BC2TC-4KH is an inductive proximity sensor. It is used for non-contact detection of metal targe..
50.00USD Ex Tax: 50.00USD
2 Telli M18 İndüktif sensör NC -220V
2 Telli M18 İndüktif sensör NC -220 Volt ile 90v Ac gerilim aralığında çalışırDevreye seri bağlantı ..
50.00USD Ex Tax: 50.00USD
2 Telli M18 İndüktif sensör NO -220V
2 Telli M18 İndüktif sensör NO -220 Volt ile 90v Ac gerilim aralığında çalışırDevreye seri bağlantı ..
55.00USD Ex Tax: 55.00USD
2 Telli M12 İndüktif sensör NC -220V
M12M-CD2TD-2KH is an inductive proximity sensor. It is used for non-contact detection of metal targe..
50.00USD Ex Tax: 50.00USD






