IC697CHS783

VME Integrator Racks, 17 Slot Front and Rear Mount (IC697CHS782/783)

The IC697CHS783 is a 17-slot VME integrator rack designed for use with the IC697 Programmable Logic Controller (PLC). This rack is compatible with 3rd party VME modules and IC697 CPU and I/O modules. It's ideal for systems that require flexibility in integrating both types of modules.
Key Features:

    Compatibility: Supports 3rd party VME modules with 0.8-inch spacing and all IC697 PLC module types.
    Mounting Options:
        Rear-mount: Fits into a 10-inch (254 mm) deep enclosure.
        Front-mount: Fits into a standard 19-inch (483 mm) rack.
    Power Supply Support: Accepts AC/DC and DC IC697 power supplies or external supplies (Power Supply Adaptor module required).
    Dual Rack Operation: You can operate two racks using a single power supply.
    High-Current Configurations: Designed to support high-current applications with appropriate power supply configurations.
    Optional Accessories:
        J2 backplane additions.
        Ribbon cable connections for J2 backplanes.
        Optional fan assembly for high-power modules.

Functions:

The VME Integrator Rack is designed to accommodate both 3rd party VME modules and IC697 CPU/I/O configurations, except for redundancy applications. The backplane has 17 slots spaced at 0.8 inches to fit VME modules. IC697 modules take up two slots each, as they require 1.6-inch spacing.

    Module Configuration Options:
        You can install 17 3rd party VME modules (no IC697 modules).
        Nine IC697 modules can be installed.
        Or, a combination of IC697 and 3rd party VME modules.

    Note: A maximum of three VME modules can be used in a rack with IC697 modules due to power limitations.

    Flexibility: The rack supports both types of modules through adjustable jumpers on the backplane. These jumpers can be reconfigured depending on the VME module requirements.

    Power Supply Sharing: Two racks can share a single power supply, with the Power Supply Extension Cable (IC697CBL700) available for such configurations.

    Power Connections: The backplane includes +5V, +12V, -12V, and 0V power connections. However, these are not intended for direct connection to external 3rd party power supplies.

Rack Dimensions:

    Height: 11.15 inches (283 mm)
    Width: 19 inches (483 mm)
    Depth: 7.25 inches (184 mm)
    Slot Width: Each slot is 0.8 inches wide, except for the power supply slot, which is 2.4 inches wide.

No jumpers or DIP switches are needed for addressing I/O modules in this rack, as it includes automatic slot sensing.



>> GE Fanuc IC697CHS783 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC697CHS783 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."