IC697CHS782
VME Integrator Racks, 17 Slot Front and Rear Mount (IC697CHS782)
This rack is designed for the IC697 Programmable Logic Controller (PLC) and supports both 3rd party VME modules and IC697 CPU and I/O modules. It features a 17-slot backplane and is ideal for integrating 3rd party modules into IC697 systems.
Key Features:
Compatibility: Supports 3rd party VME modules and all IC697 PLC modules.
Mounting Options:
The rear-mount version fits into a 10-inch (254 mm) deep enclosure.
The front-mount version fits into a standard 19-inch (483 mm) rack.
Power Supply Options: Can use plug-in AC/DC or DC IC697 power supplies, or an external supply (Power Supply Adaptor module required).
Dual Rack Operation: One power supply can operate two racks.
High-Current Configurations: Special provisions are available for high-current applications.
Optional Accessories: Kits available to add a J2 backplane or to make ribbon cable connections to J2 backplanes.
Optional Fan Assembly: A fan assembly can be added for high-power modules.
Functions:
This rack is used for 3rd party VME modules and IC697 CPU and I/O configurations, excluding redundancy applications. The 17-slot backplane is designed to simplify the integration of 3rd party VME modules into an IC697 PLC system. Integration of VME modules should follow the guidelines in the User’s Guide to Integration of 3rd Party VME Modules.
Slot Spacing: The backplane connectors are spaced at 0.8-inch intervals to accommodate 3rd party VME modules. IC697 modules require two slots each, and standard IC697 racks have slots spaced at 1.6-inch intervals.
Module Configurations: You can configure the rack in three ways:
With 17 3rd party VME modules (no IC697 modules installed),
With 9 IC697 modules, or
A combination of IC697 and 3rd party VME modules.
However, a maximum of three VME modules can be used in a rack with IC697 modules.
Flexibility: The rack allows for both IC697 and VME modules by adjusting jumpers on the backplane. These jumpers can be moved to different positions to suit the requirements of each module.
Power Sharing: Two racks can share a single power supply for applications with extended I/O requirements. The Power Supply Extension Cable (IC697CBL700) is available for this purpose.
Power Connections: The backplane provides +5V, +12V, -12V, and 0V power connections, though these are not intended for direct connection to a 3rd party power supply.
Rack Dimensions:
Height: 11.15 inches (283 mm), Width: 19 inches (483 mm), Depth: 7.25 inches (184 mm).
Each slot is 0.8 inches wide, except for the power supply slot, which is 2.4 inches wide.
Each rack provides slot sensing for I/O modules, and no jumpers or DIP switches are required for addressing the modules.
>> GE Fanuc IC697CHS782 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)