IC697CHS771

Two racks can be interconnected to share a single power supply for applications requiring extended I/O. A Power Supply Extension Cable kit (IC697CBL700) is available for such applications.

Each rack provides slot sensing for rack-type I/O modules. No jumpers or DIP switches are required on the I/O modules for addressing. The overall dimensions of the rack are 11.15” H x 19” W x 7.25” D (283mm x 483mm x 184mm). Slots are 0.8” wide, except for the power supply slot, which is 2.4” wide, and the CPU slot, which is 1.6” wide. One connector is not installed to accommodate the CPU's width.

General Features:

    Accepts VME modules requiring 0.8” spacing
    Compatible with all IC697 PLC module types and IC687 (VME) I/O and communications modules
    Rear-mount rack fits into a 10” (254 mm) deep enclosure
    Front-mount rack fits into a standard 19” (483 mm) rack
    Accepts plug-in AC/DC and DC IC697 power supplies or can use an external power supply (Power Supply Adaptor module required)
    Allows operation of two racks from a single power supply
    Provides power supply support for high-current configurations
    Optional fan assembly available for high-power modules

Functions:

The IC697 Programmable Logic Controller (PLC) Redundant Rack supports VME modules and all IC697 configurations, including redundancy applications (requires the IC687 Redundancy Communications Module and Bus Transmitter Module). The rack has two power supply slots and 12 backplane slots divided into two separate sections, each with a power supply slot and 6 backplane slots. It is designed for easy integration of third-party VME modules into an IC697 PLC system. The integration of third-party VME modules must follow guidelines provided in the User’s Guide to Integration of 3rd Party VME Modules.

Backplane connectors are spaced 0.8 inches apart to accommodate VME modules. IC697 modules use two of these slots, as standard IC697 racks have slots spaced at 1.6 inches for IC697 modules.

Each rack configuration can support two power supplies, one in the leftmost module position and the other in the rightmost module position. The rack can support:

    Ten (10) VME modules (with no IC697 modules installed), or
    Four (4) IC697 modules, with the Blank Slot Interrupt connector (IC697ACC722) inserted into unused slots, or
    A combination of IC697 and VME modules, with the Blank Slot Interrupt connector (IC697ACC722) in unused slots.

The power supply capacity may limit the number of modules in a rack. No more than three VME modules can be used in a rack with IC697 modules.

This flexibility to allow both VME and IC697 modules is achieved by using jumpers on the backplane and the Blank Slot Interrupt Jumper Assembly (IC697ACC722) to configure slots. The VME Redundant rack is factory-configured to accept IC687 VME modules. Integration of third-party VME modules requires moving jumpers (located next to connectors) to different positions.

This rack is ideal for systems requiring high reliability, redundancy, and flexible module integration.


>> GE Fanuc IC697CHS771 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC697CHS771 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."