IC697CHS750

Five Slot, Rear Mount - IC697CHS750 (5-Slot Rear-Mounted Rack)

The IC697CHS750 is a 5-slot, rear-mounted rack designed for use in industrial automation systems. It supports both IC697 CPU and I/O modules, providing flexibility for different configurations.
Key Features:

    Compatibility: Accepts all IC697 PLC module types.
    Mounting:
        Rear mount: Fits into a 10-inch (254 mm) deep enclosure, with no need for additional fans in most cases.
        Front mount: Fits into a standard 19-inch (483 mm) rack.
    Power Supply: Supports plug-in AC or DC IC697 power supplies.
    Dual Rack Operation: You can operate two racks with a single power supply.
    Power Supply Compatibility: Refer to page 5 for more details on power supply compatibility.

Functions:

The Five-Slot Rack (IC697CHS750) and the Nine-Slot Rack (IC697CHS790/791) are designed for use with the IC697 programmable controller. Each rack has a dedicated power supply slot at the leftmost position.

    Dimensions:
        Nine-Slot Rack: 11.15 inches (283 mm) height, 19 inches (483 mm) width, 7.5 inches (190 mm) depth.
        Five-Slot Rack: 11.15 inches (283 mm) height, 13 inches (320 mm) width, 7.5 inches (190 mm) depth.
    Slot Widths: Each slot is 1.6 inches wide, with the power supply slot being 2.4 inches wide.

Two racks can be interconnected to share a single power supply for applications that require extended I/O. The Power Supply Extension Cable (IC697CBL700) is available for this purpose.
Rack Mounting:

To ensure proper airflow for cooling, the rack must be mounted in the correct orientation with adequate space around it. If heat buildup is a concern, a Rack Fan Assembly can be used. The available options include:

    IC697ACC721: For 120 VAC power supply.
    IC697ACC724: For 240 VAC power supply.
    IC697ACC744: For 24 VDC power supply.

I/O Connections:

This rack accommodates high-density I/O modules, each supporting #14 AWG (2.10mm²) wires. The wires are routed through the terminal board and secured with a cleat.
Mechanical Keying:

Each IC697 I/O module is mechanically keyed to prevent incorrect module insertion. When a module is inserted, the key locks onto the center rail of the rack. If the module needs to be moved, the key can be released and reattached in the new position.
Power Supply Extension Cable:

One power supply can support two racks if the second rack requires 5 volts at 5.2 amperes or less. The 1-meter Power Supply Extension Cable provides power and signal sequencing. The cable connects to a 9-pin D-type connector on the backplane. Ensure 6 inches (152.4 mm) of clearance on the left side for cable access.
Slot Addressing:

The IC697 PLC system allows users to configure I/O point addresses without the need for DIP switches or jumpers. Configuration is done through MS-DOS or Windows programming software.
Rack Numbering:

Each rack in the system must be assigned a unique number (0-7), with Rack 0 reserved for the CPU. Rack numbers are set using four binary-coded jumpers located behind the power supply on the backplane.



>> GE Fanuc IC697CHS750 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC697CHS750 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."