IC697MDL654
The IC697MDL654 is a 48 Volt DC Positive/Negative Logic, 32-Point Input Module designed for industrial automation systems. It provides 32 input points in four isolated groups, each containing eight points. The module is compatible with proximity switches and offers selectable input filtering and interrupt capabilities.
Key Features:
32 input points: Organized into four isolated groups of eight points each.
Positive/Negative Logic Compatibility: Can handle both positive and negative logic.
Proximity switch compatibility: Works with both 2-wire and 3-wire proximity switches.
Selectable input filter: Configurable to 1ms or 10ms.
Interrupt capability: One input can be configured to generate a CPU interrupt.
Technical Specifications:
Rated Voltage: 48 volts DC.
Inputs per Module: 32 inputs (four groups of 8 inputs).
Input Isolation: 1500 volts RMS between input and backplane, 500 volts RMS between input groups.
Input Voltage Range: -3V to +56V DC.
Input Current: 4.7mA typical at rated voltage.
Input Impedance: 10.3K ohms typical.
On-state Voltage: 33V to 56V DC.
On-state Current: 3mA to 7mA.
Off-state Voltage: 0V to 10V DC.
Off-state Current: Up to 2mA leakage current.
Filter Delay: Configurable to either 1ms or 10ms.
Power Consumption: 0.30 amps from the 5V backplane bus.
VME Compatibility: Supports the VME standard.
Input Characteristics:
This module supports both positive and negative logic, allowing it to source or sink current from the input device to the user common. It is compatible with pushbuttons, limit switches, selector switches, and electronic proximity sensors.
3-wire proximity switches are ideal due to their low ON-state voltage drop and low OFF-state leakage current.
2-wire proximity switches should be carefully evaluated for ON and OFF state compatibility, as they tend to have higher ON-state voltage and OFF-state leakage current.
Input Filter Selection:
The module allows the selection of 1ms or 10ms input filters, which apply to all points on the module. This ensures stable signal processing in environments with electrical noise.
Interrupt Configuration:
When used with an IC697 CPU, input point A1 can be configured to generate a CPU interrupt, which can be triggered on the rising or falling edge of a signal. This feature is useful for real-time control applications.
Mechanical Keying:
The module includes a mechanical key to prevent incorrect placement in the rack. Once inserted, the key latches onto the backplane rail, ensuring that only identical modules can be used in that slot. The key can be removed and reinserted into another slot if necessary.
Removal Instructions:
Firmly grasp the module at the top and bottom of the cover.
Squeeze the rack clips at the back of the module to disengage it from the rail.
Slide the module along the card guide and carefully remove it from the backplane connector.
>> GE Fanuc IC697MDL654 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)