IC697MDL252

12 Volt AC, 32-Point Input Module - IC697MDL252

The IC697MDL252 is a 12 Volt AC, 32-point input module designed for use in GE Fanuc's Series 90-70 PLC systems. It provides 32 input points organized into four isolated groups of eight points each, making it ideal for applications that require input from different phases of an AC supply.

Features

    32 Points: Four isolated groups of 8 points each.

    20 ms input filter for noise suppression.

    Proximity switch compatibility for a variety of input devices.

    LED indicators for each point to display the ON-OFF status on the logic (PLC) side of the circuit.

    Mechanical keying to ensure proper module replacement and prevent incorrect installation.

    No jumpers or DIP switches required for configuration, done via MS-DOS® or Windows® programming software.

    User-configurable I/O references.

Functions

This module provides resistive input with current-voltage characteristics that comply with IEC standards (type 1), making it compatible with a wide range of proximity switches and other input devices, such as:

    Pushbuttons, limit switches, and selector switches.

    Electronic proximity switches (both 2-wire and 3-wire types).

The input circuitry ensures reliable operation, with 10mA input current in the ON state and the ability to handle up to 2mA leakage current in the OFF state without causing false triggering. Three-wire proximity switches are easily compatible due to their low voltage drop and low leakage current. Two-wire proximity switches, which derive power from the signal connections, are also compatible, but careful evaluation is needed for both ON and OFF state compatibility.

Input Characteristics

    ON State: Compatible with proximity switches with ON characteristics that fall to the left of the input load line on the provided graph. For example, a switch with 3mA at 5 volts drop is compatible.

    OFF State: Compatible if the proximity switch leakage current is less than 2mA when the module input voltage is 2.5 volts or less.

Module Power and Mechanical Keying

The module requires 0.30 amps from the 5-volt bus on the backplane. It is equipped with mechanical keying to prevent incorrect module substitution. The key latches onto the backplane's center rail during installation and remains there even after the module is removed, ensuring only identical module types can be installed in the same slot.

If the module needs to be relocated, the key can be removed and reinserted in a new slot. The power supply must always be in the leftmost rack position.

Field Wiring

The field wiring is designed for easy connection. Each group of eight inputs is isolated from the others, and each group requires a separate power source wire connected to the designated terminal. The detachable terminal board accepts wire sizes from #22 to #14, allowing for two wires to be terminated on a single lug if they are the same size.

The module can accommodate a bundle of 40 wires with room for proper routing through the terminal board cavity. A cable tie can be used to secure the wire bundle to the terminal board.

This 12 Volt AC, 32-point input module (IC697MDL252) is ideal for applications requiring multiple isolated input points, compatibility with various proximity switches, and easy field wiring and configuration.


>> GE Fanuc IC697MDL252 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC697MDL252 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."