IC697MDL250

120 Volt AC, 32-Point Input Module - IC697MDL250

Key Features:

    32 Input Points: Organized in four isolated groups of 8 points each.

    20 ms Input Filter: Ensures stable signal processing.

    Proximity Switch Compatible: Supports 2-wire and 3-wire proximity switches.

Functions:

The IC697MDL250 120 Volt AC Input Module provides 32 input points, divided into four isolated groups of eight. This structure allows each group to be used on a different phase of the AC power supply. The input circuit is capacitive, which helps reduce heat dissipation and increase reliability and longevity. The input characteristics comply with IEC Type 2 standards, making it compatible with a wide range of proximity switches and other input devices:

    Pushbuttons, limit switches, selector switches

    Electronic proximity switches: Supports both 2-wire and 3-wire devices

The module includes LED indicators that display the ON/OFF status of each input on the PLC side of the circuit. Mechanical keying ensures that only the correct type of module can be inserted in the field. Input/output references are user-configurable without requiring jumpers or DIP switches on the module itself.

Configuration is performed using the configuration function available in MS-DOS or Windows programming software running on Windows 95 or Windows NT. The programming device can be an IBM-compatible PC, such as XT, AT, or PS/2.

Module Power and Switching:

The IC697MDL250 module draws 0.35 amps from the 5V backplane. The module features mechanical keying to prevent incorrect module substitution in a given slot. When installed, the key locks onto the backplane's center rail and remains there when the module is removed. This ensures that only identical module types can be installed in the slot.

If you need to change the module’s position in the rack after the key has been latched, the key can be removed and reinserted into the desired location.

Field Wiring:

Each of the four groups of eight inputs is isolated from the others, so a separate power input wire is required for each group. The terminal board accepts wire sizes ranging from #22 to #14, and two wires of the same size can be terminated at a single lug. The terminal board cavity can accommodate a bundle of 40 #14 wires.

Wires can be secured to the terminal board using a cable tie through a cleat at the lower corner of the board.

Technical Specifications:

    Rated Voltage: 120 VAC, 47-63 Hz sinusoidal.

    Inputs per Module: 32 (four groups of 8 inputs).

    Isolation:

        1500 volts RMS (input to backplane).

        500 volts RMS (between input groups).

    Input Current: 10mA (typical) at rated voltage (reactive).

    On-State Voltage: 75 to 132 volts AC, 47-63 Hz.

    Off-State Voltage: 0 to 25 volts AC.

    On-State Current: 6mA to 15mA.

    Off-State Current: 0 to 3mA (2.2mA minimum at 25V input).

    Filter Delay Time: 20ms (typical).

    Current Required from 5VDC Backplane: 0.35 amps.

This module is designed to support the VME standard C.1 and complies with various installation requirements for standards such as FCC or European Union Directives.


>> GE Fanuc IC697MDL250 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC697MDL250 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."