IC697MDL240

The IC697MDL240 is a 120 Volt AC discrete input module with 16 isolated input points. It is commonly used in industrial automation systems and supports operation across different phases. Designed to meet IEC standards, this module ensures reliable and long-lasting performance, compatible with devices like proximity sensors, pushbuttons, and limit switches.

Key technical features include:

    16 isolated inputs: Each input is isolated up to 1500 volts RMS, allowing for safe operation across different phases.

    Input current: Each input typically draws 10mA of current, providing energy efficiency and long-term reliability.

    Compatibility: The module is compatible with both 2-wire and 3-wire proximity sensors. It draws between 8mA and 15mA in the ON state and can handle up to 4mA of leakage current in the OFF state.

    Input filtering: A typical 20ms input filter ensures stable signal processing, minimizing the effect of electrical noise.

    LED indicators: Located at the top of the module, these LEDs show the status of each input, helping users easily monitor the PLC side of the circuit.

    Mechanical keying: A mechanical key system prevents incorrect module placement, ensuring that only the correct module type is inserted into the slot.

For installation and wiring:

    The module's detachable terminal board supports wire sizes from AWG #22 to AWG #14. Two wires of the same size can be terminated on a single terminal.

    Cable ties can be used to secure bundles of wires to the terminal board, keeping wiring organized and safe.

When using this module, remember that each input is isolated, and proper insulation practices should be applied to prevent voltage differences between phases. Also, make sure to use shielding techniques in environments with electrical noise to ensure accurate signal transmission. For optimal performance, pay close attention to installation details and maintain the system properly.

>> GE Fanuc IC697MDL240 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC697MDL240 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."