IC697VAL328
IC697VAL328 Isolated 12-bit Analog Output Board
Features
- Four or eight fully isolated analog outputs
- Up to 1,500V isolation, channel-to-channel and channel-to-VMEbus
- 12-bit resolution
- Selectable voltage output ranges: ±2.5V, ±5V, ±10V, 0 to +2.5V, +5V, or +10V
- Voltage outputs protected up to ±20V continuously; transients up to ±50V
- Load capacity of 10mA for voltage outputs across the full ±10V range
- Available with 4-20mA, 0-20mA, or 5-25mA current loop outputs
- Voltage and current loop output accuracy of 0.08%
- Optical data coupling provides full galvanic isolation
- Static readback data registers for simplified program control
- Program-controlled connect/disconnect of voltage outputs for system testing
- Accepts pluggable barrier strip cable connector with user screw interface
- Latching connectors provided
Applications
- Isolated analog subsystems
- Analog current loops
- Nuclear facility instrumentation
- Automatic test equipment (ATE)
- Supervisory control systems
- High interference environments
- Intersystem analog data transmission
- Ground loop elimination
General Description
The IC697VAL328 is available with either four or eight isolated, high-quality 12-bit analog output channels on a 6U form factor VMEbus board. Each channel is electrically isolated from all others and from the VMEbus, supporting up to 1,500V isolation. Voltage output ranges are selectable as ±2.5V, ±5V, ±10V, or 0 to +2.5V, +5V, and +10V. The Analog Output Board supports a 10mA load across all voltage ranges.
Functional Characteristics
- Control: Control is handled through the Control and Data Register group, which can be located on any 16-word boundary in either the short I/O (A16) space or the standard (A24) memory space.
- Board Access: Short I/O (A16) address bits A05-A15 or Standard (A24) address bits A05-A23 are compared with field-configurable jumpers for board selection. Address modifiers are decoded to support supervisory, user access, or both.
- Compatibility: This product complies with VMEbus Specification ANSI/IEEE STD 1984-1987 IEC 821 and 297.
Electrical Characteristics
- Number of Output Channels: Four or eight channels
- Resolution: 12 bits
- Configuration: Differential, isolated channel-to-channel, and channel-to-VMEbus
- Common Mode Voltage (CMV) Range: ±1,500V, channel-to-channel, channel-to-VMEbus
- Isolation Resistance: 50MΩ, channel-to-channel and channel-to-VMEbus
- Isolation Capacitance: 100pF channel-to-channel, 150pF channel-to-VMEbus
- Isolation Withstand Voltage: 1,500Vpk (1,050V RMS)
Voltage Outputs
Voltage Ranges: Jumper-selectable as ±2.5V, ±5V, ±10V (bipolar); 0 to +2.5V, +5V, or +10V (unipolar)
Output Drive: ±10mA across full ±10V dynamic range
Output Impedance: Connected mode: <0.8Ω; Disconnected mode: >1MΩ
Gain Error: ±0.08% maximum
Voltage Offset: ±4mV
Integral Nonlinearity: 0.025% maximum (referenced to best-fit straight line)
Gain Drift: ±60PPM/°C, ±150PPM/1,000 hours
Offset Voltage Drift: ±275μV/°C, ±500μV/1,000 hours
>> GE Fanuc IC697VAL328 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)