IC697VAL304

IC697VAL304 Isolated 12-bit Analog Output Board

Features

  • Four or eight fully isolated analog outputs
  • Up to 1,500V isolation, channel-to-channel and channel-to-VMEbus
  • 12-bit resolution
  • Selectable voltage output ranges: ±2.5V, ±5V, ±10V, 0 to +2.5V, +5V, or +10V
  • Voltage outputs protected up to ±20V continuously; transients up to ±50V
  • Load capacity of 10mA for voltage outputs across the full ±10V range
  • Available with 4-20mA, 0-20mA, or 5-25mA current loop outputs
  • Voltage and current loop output accuracy of 0.08%
  • Optical data coupling provides full galvanic isolation
  • Static readback data registers for simplified program control
  • Program-controlled connect/disconnect of voltage outputs for system testing
  • Accepts pluggable barrier strip cable connector with user screw interface
  • Latching connectors provided

Applications

  • Isolated analog subsystems
  • Analog current loops
  • Nuclear facility instrumentation
  • Automatic test equipment (ATE)
  • Supervisory control systems
  • High interference environments
  • Intersystem analog data transmission
  • Ground loop elimination

General Description

The IC697VAL304 is available with either four or eight isolated, high-quality 12-bit analog output channels on a 6U form factor VMEbus board. Each channel is electrically isolated from all others and from the VMEbus, supporting up to 1,500V isolation. Voltage output ranges are selectable as ±2.5V, ±5V, ±10V, or 0 to +2.5V, +5V, and +10V. The Analog Output Board supports a 10mA load across all voltage ranges.

Functional Characteristics

  • Control: Control is handled through the Control and Data Register group, which can be located on any 16-word boundary in either the short I/O (A16) space or the standard (A24) memory space.
  • Board Access: Short I/O (A16) address bits A05-A15 or Standard (A24) address bits A05-A23 are compared with field-configurable jumpers for board selection. Address modifiers are decoded to support supervisory, user access, or both.
  • Compatibility: This product complies with VMEbus Specification ANSI/IEEE STD 1984-1987 IEC 821 and 297.

Electrical Characteristics

  • Number of Output Channels: Four or eight channels
  • Resolution: 12 bits
  • Configuration: Differential, isolated channel-to-channel, and channel-to-VMEbus
  • Common Mode Voltage (CMV) Range: ±1,500V, channel-to-channel, channel-to-VMEbus
  • Isolation Resistance: 50MΩ, channel-to-channel and channel-to-VMEbus
  • Isolation Capacitance: 100pF channel-to-channel, 150pF channel-to-VMEbus
  • Isolation Withstand Voltage: 1,500Vpk (1,050V RMS)

Voltage Outputs

Voltage Ranges: Jumper-selectable as ±2.5V, ±5V, ±10V (bipolar); 0 to +2.5V, +5V, or +10V (unipolar)

Output Drive: ±10mA across full ±10V dynamic range

Output Impedance: Connected mode: <0.8Ω; Disconnected mode: >1MΩ

Gain Error: ±0.08% maximum

Voltage Offset: ±4mV

Integral Nonlinearity: 0.025% maximum (referenced to best-fit straight line)

Gain Drift: ±60PPM/°C, ±150PPM/1,000 hours

Offset Voltage Drift: ±275μV/°C, ±500μV/1,000 hours

>> GE Fanuc IC697VAL304 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC697VAL304 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."