IC697VAL301

IC697VAL301 - 32-Channel Analog Output Board with Built-in-Test

Part Number: GFK-2102
Date: April 2002

Features

  • Thirty-two analog output channels
  • 12-bit D/A converter
  • Sample-and-Hold buffer for each output
  • Short circuit and transient protection for outputs
  • Unipolar (0 to 10V, 0 to +5V) or bipolar (±2.5V, ±5V, ±10V) options
  • Program-selectable scan rates for complex output functions
  • 10mA output current
  • Program-controlled online and offline operating modes
  • Built-in-Test (BIT) on-board to test 100% of active components
  • Effective in both online and offline modes
  • On-board self-test multiplexer and A/D converter
  • Semiconductor output switches to ensure accuracy
  • Output impedance of 0.1Ω
  • On-board ±15V DC-to-DC conversion
  • Front panel activity LED

Introduction
The Analog Output Board provides 32 high-quality analog output channels, which can be programmed using on-board jumpers to operate in a variety of voltage ranges. All outputs have 12-bit resolution and can source or sink 10mA at ±10V. For offline testing, the analog outputs can be disconnected from external circuits.

Functional Characteristics

  • VMEbus Compliance: The board is compatible with the VMEbus specification (Rev. C.1).
  • VMEbus Access: Address modifier bits are jumper-selected and decoded for non-privileged or supervisory short I/O.
  • Output Data Transfer: Each analog output channel has a dedicated register, with data periodically retrieved, converted, and transferred to one of 32 output Sample-and-Hold buffers.
  • Built-in-Test (BIT): The on-board BIT logic allows testing of all active components, including output switches, using an on-board A/D converter and multiplexer.
  • SysFail: Application of the SysFail signal via the VMEbus initializes the board, disconnecting all analog outputs.
  • Front Panel Fail LED: Illuminates on system reset and can be controlled via software to indicate errors.

Analog Outputs

  • Channels: 32 output channels, one Sample-and-Hold buffer per channel
  • Full-Scale Output: Unipolar: 0 to +10V, 0 to +5V; Bipolar: ±2.5V, ±5V, ±10V (jumper-selectable)
  • Resolution: 12-bit digital-to-analog conversion
  • Output Load Current: ±10mA across the entire ±10V output range
  • Output Impedance: <0.1Ω
  • Total Error: ±0.05% of full-scale range
  • Settling Time: Maximum 3.4ms to 1 LSB
  • Refresh Rate: Default 294Hz; FAST REFRESH rate of 940Hz
  • Short Circuit Protection: Indefinite short to common; transient overvoltage protection up to ±25V

Built-in-Test (BIT)

  • Configuration: On-board 32-channel multiplexer and 12-bit ADC
  • Output Monitor: Monitors board outputs in online mode and Sample-and-Hold buffer outputs in offline mode
  • Scan Rate: 26,000 channels/second

Physical/Environmental Characteristics

Dimensions: Standard VME double height board, 160mm x 233.5mm

Temperature: Operating: 0 to 55°C, Storage: -25 to +85°C

Humidity: 20 to 80% relative humidity, non-condensing

Cooling: Convection

Power Requirements: +5VDC (±5%) at 3.5A max

MTBF: 86,770 hours (MIL STD 217F)

Agency Approvals: UL1604, C-UL Certification for Class 1, Div. 2, Groups A, B, C, D Hazardous Locations


>> GE Fanuc IC697VAL301 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC697VAL301 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."