IC697VAL264
IC697VAL264/IC697VAL232/IC697VAL216 High-Performance 16-bit Analog-to-Digital Converter (ADC)
Part Number: GFK-2092
Date: March 2002
Introduction
This product is designed to support up to 64 channels of differential wide-range analog inputs (±250mV to ±10V).
Features
- Supports differential analog inputs
- 16-bit A/D conversion
- Software-selectable conversion rate (up to 100kHz)
- Program-selectable scanning of 16, 32, or 64 channels
- Continual digitization of selected input channels with results storage
- Three trigger modes:
- Software trigger
- External trigger
- Interval timer trigger
- Three scan modes:
- Autoscan
- Single scan
- Random access
- Programmed VMEbus interrupts
- User-programmable interval timer
- Software-programmable gain (x1 or x10)
- External trigger for synchronized operation of multiple boards
- Jumper-selectable A/D ranges of 0 to +5V, 0 to +10V, ±2.5V, ±5V, and ±10V
- Overvoltage protected inputs
- 16-word deep data buffer per channel
- Selectable output coding
- Powers up in autoscanning mode with unity gain
Applications
- Factory automation and instrumentation
- Process control
- Laboratory instrumentation
- Machine monitoring
- Data acquisition
Trigger Modes
- Software Trigger: Initiates scanning via a software command.
- External Trigger: Receives trigger signals through the P2 connector.
- Interval Timer Trigger: Initiates scanning based on the programmed time interval.
Scan Modes
- Autoscan: Continuously scans all active channels in sequential order.
- Single Scan: Scans all selected channels once and stops.
- Random Access: Selects and digitizes a single channel each time the trigger is activated.
Related Products
- IC697VAL264: Analog Voltage Input; 64 Channels, 16-bit
- IC697VAL232: Analog Voltage Input; 32 Channels, 16-bit
- IC697VAL216: Analog Voltage Input; 16 Channels, 16-bit
Each product offers dual-port data registers for continuous scanning. VMEbus access allows real-time reading of stored data, and the board can handle up to 100k samples per second (SPS). Channel gain is software-controlled with x1 or x10 gain options.
Functional Characteristics
Operating Modes: Software, External, and Interval Timer Triggers
VMEbus Compliance: Compliant with ANSI/IEEE STD 1014-1987 and IEC 821 and 297
Reset Operations: Board reset occurs on system reset or through software control
Data Ready Flag: A flag is set when the buffer is full or half-full
Input Ranges: ±2.5V, ±5V, ±10V, 0 to +5V, 0 to +10V (jumper selectable)
Overvoltage Protection: ±35V sustained, ±80V transient (1 second maximum)
Input Filters: Low-pass filters at -3dB and 500Hz
Accuracy: ±0.005% reading, ±0.005% range ±100μV
>> GE Fanuc IC697VAL264 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)