IC697VAL216

IC697VAL264/IC697VAL232/IC697VAL216 High-Performance 16-bit Analog-to-Digital Converter (ADC)

Part Number: GFK-2092
Date: March 2002

Introduction
This product is designed to support up to 64 channels of differential wide-range analog inputs (±250mV to ±10V).

Features

  • Supports differential analog inputs
  • 16-bit A/D conversion
  • Software-selectable conversion rate (up to 100kHz)
  • Program-selectable scanning of 16, 32, or 64 channels
  • Continual digitization of selected input channels with results storage
  • Three trigger modes:
    • Software trigger
    • External trigger
    • Interval timer trigger
  • Three scan modes:
    • Autoscan
    • Single scan
    • Random access
  • Programmed VMEbus interrupts
  • User-programmable interval timer
  • Software-programmable gain (x1 or x10)
  • External trigger for synchronized operation of multiple boards
  • Jumper-selectable A/D ranges of 0 to +5V, 0 to +10V, ±2.5V, ±5V, and ±10V
  • Overvoltage protected inputs
  • 16-word deep data buffer per channel
  • Selectable output coding
  • Powers up in autoscanning mode with unity gain

Applications

  • Factory automation and instrumentation
  • Process control
  • Laboratory instrumentation
  • Machine monitoring
  • Data acquisition

Trigger Modes

  • Software Trigger: Initiates scanning via a software command.
  • External Trigger: Receives trigger signals through the P2 connector.
  • Interval Timer Trigger: Initiates scanning based on the programmed time interval.

Scan Modes

  • Autoscan: Continuously scans all active channels in sequential order.
  • Single Scan: Scans all selected channels once and stops.
  • Random Access: Selects and digitizes a single channel each time the trigger is activated.

Related Products

  • IC697VAL264: Analog Voltage Input; 64 Channels, 16-bit
  • IC697VAL232: Analog Voltage Input; 32 Channels, 16-bit
  • IC697VAL216: Analog Voltage Input; 16 Channels, 16-bit

Each product offers dual-port data registers for continuous scanning. VMEbus access allows real-time reading of stored data, and the board can handle up to 100k samples per second (SPS). Channel gain is software-controlled with x1 or x10 gain options.

Functional Characteristics

Operating Modes: Software, External, and Interval Timer Triggers

VMEbus Compliance: Compliant with ANSI/IEEE STD 1014-1987 and IEC 821 and 297

Reset Operations: Board reset occurs on system reset or through software control

Data Ready Flag: A flag is set when the buffer is full or half-full

Input Ranges: ±2.5V, ±5V, ±10V, 0 to +5V, 0 to +10V (jumper selectable)

Overvoltage Protection: ±35V sustained, ±80V transient (1 second maximum)

Input Filters: Low-pass filters at -3dB and 500Hz

Accuracy: ±0.005% reading, ±0.005% range ±100μV

>> GE Fanuc IC697VAL216 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC697VAL216 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."