IC697ACC736
Cable Shield Clamping Assembly (IC697ACC736)
The Cable Shield Clamping Assembly (IC697ACC736) is designed to improve Electromagnetic Compatibility (EMC) immunity for shielded cables used in IC69 PLC products*, especially in harsh industrial environments. This assembly provides a secure and effective method for grounding shielded cables, ensuring better protection against electromagnetic interference.
Enhanced EMC Immunity: Improves protection against electromagnetic interference in industrial settings.
Suitable for Harsh Environments: Designed specifically for installations in severe industrial environments.
Compatible with All IC69 PLC Products*: Can be used across the entire IC69* PLC product range.
Easy Assembly: Simple to install and use, with all necessary parts included.
Versatile Mounting Options: Can be mounted on a panel, a rack enclosure, or directly onto an IC697 rack.
Package Contents
One Ground Plate: For grounding shielded cables.
Six Cable Clamps: To secure cables to the ground plate.
Four #6 Self-Tapping Screws: For mounting the assembly securely.
Functionality
The Cable Shield Clamping Assembly ensures the grounding of shielded cables by using the included ground plate and clamps. This is especially critical in industrial environments where high levels of electromagnetic interference (EMI) may be present. Grounding the cable shields properly helps in reducing noise and protecting the system from electrical disturbances.
Mounting and Installation
Location: The ground plate should be mounted near the PLC rack, whether it’s for IC697 or IC693 installations. It provides both mechanical relief for the cables and electrical grounding for the shields.
Cable Clamp Usage: To secure a cable, slide the clamp into two adjacent slots on the ground plate. Remove the required section of the cable's outer cover, place the cable between the clamp and the ground plate, and tighten the thumbscrew.
Note: Avoid overtightening the thumbscrew. It should be hand-tightened or lightly tightened with a tool to avoid damaging the cable.
Mounting Surface: If installing the ground plate on a painted surface, ensure the paint is removed from the mounting area to establish a good electrical ground connection.
Dimensions and Mounting Requirements
Ground Plate Dimensions:
Length: 19.00 inches (483 mm)
Width: 4.25 inches (108 mm)
Mounting Hole Diameter: 0.250 inches (6.35 mm) (two holes)
Cable Clamp: Six clamps are included in the assembly, and additional clamps are available for purchase under catalog number IC697ACC737 (package of 12).
Additional Notes
The assembly is designed for ease of installation, with clear mounting guidelines and minimal requirements for specialized tools.
Proper grounding is essential for ensuring the long-term reliability and functionality of PLC systems, especially in environments with significant electromagnetic interference.
This assembly is an essential accessory for installations that demand higher EMC immunity, ensuring that shielded cables are properly grounded and secured.
>> GE Fanuc IC697ACC736 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)