IC693CBL334

The IC693CBL334 cable features two 24-pin, 90-degree connectors, designed for right-side use with 32-point modules. Below are the key details:

   CBL327 and CBL328: These cables have a right-angle 24-pin connector (Fujitsu FCN–365S024–AU) on one end, and the other end consists of stripped wire ends. The cable length is 10 feet (3 meters).
   Other cable types: All other cables, including the IC693CBL334, have Fujitsu FCN–365S024–AU connectors on both ends and are wired pin-to-pin (for example, pin A1 to pin A1, pin A2 to pin A2, etc.).
   Current rating: Each pin has a current capacity of 1.2 Amps.

Connector Depth:

   The prefabricated I/O cables extend 2 inches (51 mm) out from the face of the modules to which they are connected.
   When planning the installation, the cabinet where the PLC is mounted should accommodate this extra 2-inch depth added by the connector.

This configuration ensures compatibility and proper wiring for 32-point I/O modules while maintaining space and current flow requirements.

>> IC693CBL334 Data cables User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693CBL334 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."