IC693CBL322
The IC693CBL322 cable has been discontinued and replaced by the IC693CBL331 and IC693CBL332 cables. The 6 feet (2 meters) I/O cable connects a 24-pin connector on the module to the connector on the terminal block. It is used with Terminal Block Quick Connect (TBQC) assemblies. For additional information and module lists, refer to Appendix J.
IC693CBL331:
The IC693CBL331 is a 6-foot (2 meters) right-angle I/O cable (both connectors are right-angled) that connects the left 24-pin connector on a 32-point module to the terminal block. It replaces the IC693CBL322 and is also used with Terminal Block Quick Connect (TBQC) assemblies. Refer to Appendix J for module and cable selection information.
Function of the Cable:
These cables are used with 16-point I/O modules equipped with a TBQC I/O faceplate adaptor. Both ends of the cable have straight 24-pin female connectors. The cable provides a pin-to-pin connection, meaning that each pin on the module connects directly to the corresponding pin on the terminal block (e.g., Pin A1 to Pin A1, Pin A2 to Pin A2, etc.).
An I/O faceplate assembly (catalog number IC693ACC334) is required, which snaps onto the module in place of the standard 20-pin terminal block. There are five different terminal blocks available to support various I/O modules. For more information on the TBQC assemblies, refer to Appendix J.
+ IC693CBL322 User manual (pdf)
>> Ge fanuc 90-30 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)