IC693CBL312

IC693CBL312 Expansion Cable Overview (Wye, 0.15 Meter / 0.5 Feet)

The IC693CBL312 is a short, 0.15-meter (0.5 feet) long expansion cable with a wye configuration, designed to daisy-chain up to seven expansion backplanes to the main backplane in an I/O bus system.

Key Features:

    Daisy-Chaining Capability: You can combine up to seven expansion backplanes using these cables to connect them to the main backplane.
    Custom Cables: For specific wiring needs, custom cables can be made, often using the IC693CBL300 model for point-to-point connections.
    No Built-in Termination: This cable does not have built-in termination, meaning that the last backplane in the expansion system must be properly terminated to ensure stable operation.

Termination Requirements:

    Terminator Plug (IC693ACC307): The last backplane in the expansion chain requires a terminator plug to maintain signal integrity and prevent erratic system behavior.
    Maximum Cable Limitations: The total length of all cables between the universal backplane and the last expansion backplane must not exceed 15 meters (50 feet). Exceeding this length can result in signal loss or erratic operation of the system.

By following these guidelines and ensuring proper termination, the IC693CBL312 cable can reliably extend and daisy-chain your I/O system with minimal signal interference.


>> IC693CBL312 cables User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693CBL312 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."