IC693CBL308

The IC693CBL308 is a 3 feet (1 meter) long I/O cable designed for high-density (32-point) I/O modules with a 50-pin connector on the module faceplate. The other end of the cable features stripped, tinned, and labeled leads for easy connection to terminal blocks or I/O field devices. This cable is compatible with the following 32-point modules:

    IC693MDL652
    IC693MDL653
    IC693MDL750
    IC693MDL751

IC693CBL308 I/O Cables (50-Pin) for 32-Point Modules:

This cable is used with 32-point high-density modules that have a 50-pin Honda connector mounted on the front of the module. The I/O cables have a 50-pin female Honda connector on one end, and stripped and tinned wires on the other. Each stripped and tinned wire has a label that corresponds to the pin number on the connector for easy identification and connection.


Specifications:

    Cable Length:
        IC693CBL308: 3 feet (1 meter)
        IC693CBL309: 6 feet (2 meters)
    Connectors:
        50-pin female Honda connector connects to the male connector on the module.
        The other end has stripped and tinned labeled wires for easy connection to terminal blocks or I/O devices.

Wiring Information:

Each wire in the cable is color-coded and labeled for easy identification. Below is an example of the wiring scheme:
Connector Pin Number    Color Code    Label Number    Loose End
1    Black    1    
2    Brown    2    
3    Red    3    
4    Orange    4    
5    Yellow    5    
6    Green    6    
7    Blue    7    
8    Violet    8    
9    Gray    9    
10    White    10    

Usage:

The IC693CBL308 cable is used to connect the 50-pin Honda connector on high-density I/O modules to terminal blocks or I/O devices. It is particularly useful in installations where the wiring must pass through conduit too small for a connector. For custom-length cables longer than 6 feet, refer to the IC693CBL308/309 datasheet for pin-out details and instructions for building custom cables.

This cable ensures reliable and easy connections to high-density I/O modules, providing flexibility and functionality for various system installations.

+  IC693CBL308 User manual (pdf)

>> Ge fanuc 90-30 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693CBL308 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."