IC693PWR328
IC693PWR328 Power Supply
The IC693PWR328 is a 30-watt power supply designed to work with a 48VDC nominal input. It accepts a voltage range between 38VDC and 56VDC. It provides three key outputs:
Output Voltages:
+5 VDC Output: This powers the core PLC system.
+24 VDC "Relay" Output: Powers the relay modules in the Series 90-30.
Isolated +24 VDC Output: This is mainly used internally but can be used externally for 24V input modules.
Load Capacity:
For the IC693PWR328, the total load capacity across all outputs should not exceed 30 watts. Here’s a breakdown:
5V output can handle up to 15 watts.
Isolated 24V output can handle up to 20 watts.
Relay 24V output can handle up to 15 watts.
Make sure the total of these outputs combined does not go over 30 watts.
Protection Features:
Overvoltage protection: For the 5V output, it kicks in between 6.4V and 7V.
Overcurrent protection: The 5V output is limited to a maximum of 4A.
Startup and Input Power:
During startup, the power supply may experience a surge current of 4A for up to 250 milliseconds.
At full load, the power supply will draw up to 50 watts.
Output Voltage Ranges:
5V output: Between 5.0 VDC and 5.2 VDC (nominal is 5.1V).
24V relay output: Between 24V and 28V.
Isolated 24V output: Between 21.5V and 28V.
Ride-Through Time:
This power supply can continue to operate for a minimum of 14 milliseconds during brief power interruptions, so the system won't immediately shut down.
Calculating Input Power and Current:
First, calculate the total output load based on the specifications of the modules you're using.
Use the provided efficiency curve graph to estimate average input power.
Divide the input power by the source voltage to get the required input current.
Use the lowest input voltage to determine the maximum input current needed.
Consider the startup surge current.
Add a 10% to 20% margin for any variations or unexpected power demands.
>> IC693PWR328 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)