IC693PWR322
The IC693PWR322 Power Supply
This power supply is designed for systems that operate with 24VDC or 48VDC. It accepts an input voltage range of 18VDC to 56VDC, but there's an important note: while the device can run with 18V, it requires at least 21VDC to start.
Output Voltages:
+5 VDC Output: Powers the main system circuit.
+24 VDC "Relay" Output: Provides power to relay modules in the system.
Isolated +24 VDC Output: Primarily used internally by modules but can also provide external power for 24V input modules.
Total Capacity:
The total capacity of this power supply is 30 watts, and the combined outputs must not exceed this limit. For example:
5V output can deliver up to 15 watts,
Isolated 24V output can provide up to 20 watts,
Relay output can deliver up to 15 watts.
However, the total combined output must not exceed 30 watts!
Protection Features:
Overvoltage protection for the 5V output activates between 6.4V and 7V.
Overcurrent protection limits the 5V output to a maximum of 4A.
Connections and Input Power:
This power supply can draw up to 50 watts at full load. When calculating the input power, you must account for how much power the system is pulling. At startup, the unit may experience a short 4A peak current, so be mindful of this surge when powering the system.
Output Voltage Details:
5V output: Ranges from 5.0 VDC to 5.2 VDC (nominal is 5.1V),
24V relay output: Between 24V and 28V,
Isolated 24V output: Between 21.5V and 28V.
Holdup Time:
The power supply can maintain operation for a minimum of 14 milliseconds during a power outage, so short interruptions won't cause the system to shut down immediately.
Input Power and Current Calculation:
Determine the total load from the modules based on their typical specifications.
Use the provided graph to estimate the power supply's efficiency.
Divide the input power by the operating source voltage to find the input current.
Use the lowest input voltage to calculate the maximum input current.
Account for startup surge current.
Allow for a 10% to 20% margin for power variations.
>> IC693PWR322 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)