IC693PWR321
The IC693PWR321 Power Supply?
This power supply is used in GE Fanuc Series 90-30 PLC systems and operates with an input voltage range of 85-264 VAC or 100-300 VDC, meaning it can be powered by both AC and DC sources.
Output Voltages:
+5 VDC Output: This powers the PLC circuit, which is the basic requirement for the system.
+24 VDC "Relay" Output: This is used to power relay modules in the PLC.
Isolated +24 VDC Output: This is mainly used internally by the modules but can also be used to power 24 VDC input modules externally.
Total Capacity:
The total power capacity of this device is 30 watts. So, the combined output should not exceed this limit. For instance, the 5V output can provide up to 15 watts, the isolated 24V output up to 20 watts, and the relay output up to 15 watts. However, all three outputs combined should stay within the 30-watt limit.
Protection Features:
For the 5V output, the overvoltage protection kicks in between 6.4 - 7V, and the overcurrent protection limits at 4A maximum.
The unit can handle inrush currents up to 4A at peak for up to 250 milliseconds, meaning it protects itself from overloads.
Connections:
You can connect the AC or DC power source using the six terminals on the device. The previous versions had five terminals, but this new version comes with six terminals to comply with European EC requirements, but it still functions the same way.
Detailed Specifications:
It consumes a maximum of 90VA with AC input.
It draws up to 50 watts when using DC input.
It has a hold-up time of at least 20 milliseconds, so the system won't shut down immediately during short power outages.
>> IC693PWR321 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)