IC693APU301
IC693APU301 Motion Mate Axis Positioning Module (APM)
The IC693APU301 Motion Mate Axis Positioning Module is a high-performance, easy-to-use motion control module designed for Series 90-30 PLCs. Available in both 1-axis (IC693APU301) and 2-axis (IC693APU302) configurations, this module combines motion control and PLC logic into a single integrated system.
Operating Modes
Standard Mode: High-performance motion control integrated with PLC logic solving functions for efficient system control.
Follower Mode: Provides electronic gearing, ideal for master/slave continuous motion control applications.
Programming Software
The APM can be configured using Logicmaster 90-30 or VersaPro software, making it easy to adjust settings and create custom programs for your system.
APM and PLC Integration
The APM and Series 90-30 PLC work together seamlessly. The APM handles axis motion and communication with the drives, while the PLC transfers data and connects operator interfaces for monitoring and control of the system.
APM Module Installation
The APM can be installed in any Series 90-30 CPU, expansion, or remote baseplate.
Embedded CPUs (311, 313, 323): Support up to 3 APM modules.
Modular CPUs (331 or higher): Support up to 8 APM modules per system, with a maximum of 3 per baseplate.
Software Capabilities
With Motion Programmer software, you can store up to 10 motion programs directly in the APM. This allows for versatile and flexible control over motion processes.
APM Connections
The APM has two 24-pin high-density connectors:
Connector A: Handles connections for Axis 1.
Connector B: For 1-axis APMs, it is used for general-purpose connections. For 2-axis APMs, it handles Axis 2 and additional general-purpose connections.
APM Cables
Available cables for APM include:
IC693CBL311: 10 feet/3 meters
IC693CBL319: 3 feet/1 meter
IC693CBL317: 10 feet/3 meters with 8-inch external shield pigtail
IC693CBL320: 3 feet/1 meter with 8-inch external shield pigtail
For custom-length cables, 24-pin I/O cable connector kits are available, including solder eyelet, crimp wire, and IDC (ribbon) receptacle options. Terminal blocks should be compatible with the cables, such as the Weidmuller RD25 910648 or equivalent.
+ IC693APU301 User manual (pdf)
>> Ge fanuc 90-30 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)