IC693MDL940 Relay Output Module

The IC693MDL940 Relay Output Module provides 16 normally-open (N.O.) relay outputs, each capable of switching up to 2 amps. The outputs are organized into four groups of four points each, with a common power terminal for each group. This module is ideal for controlling a variety of devices like motor starters, solenoids, and indicators. However, the AC or DC power required to operate the field devices must be supplied by the user, as the module itself does not include fuses.

At the top of the module, there are LED indicators that display the ON/OFF status of each output. The LEDs are arranged in two horizontal rows: the top row labeled A1 to A8 (points 1 through 8) and the bottom row labeled B1 to B8 (points 9 through 16). Inside the hinged door, there is an insert with circuit wiring information, and you can write down any notes on the outside surface. The left edge of the insert is red, indicating that this is a high-voltage module. The IC693MDL940 can be installed in any I/O slot of a 5-slot or 10-slot baseplate in a Series 90-30 PLC system.

Key Specs:

   Rated Voltage: 24V DC, 120/240V AC
   Operating Voltage Range: 5-30V DC or 5-250V AC (50/60 Hz)
   Outputs: 16 (arranged in four groups of four outputs each)
   Isolation: 1500V between the field side and logic side, 500V between groups
   Max Load: 2 amps pilot duty per output, 4 amps max per group
   Min Load: 10 mA
   Max Inrush Current: 5 amps
   Response Time: 15 ms (ON and OFF)
Power Consumption:
       7 mA from the 5V bus (all outputs ON)
       135 mA from the relay 24V bus (all outputs ON)

Follow the wiring diagram to properly connect your load devices and power source to this 2-amp N.O. relay module.

The IC693MDL940 provides 16 normally-open relay outputs that can handle up to 2 amps per output. The module is compatible with both AC and DC loads, and since each group of outputs is isolated, it ensures reliable operation without interference. The LED indicators allow you to easily monitor the ON/OFF status of each output, making it a versatile module for controlling a wide range of field devices.

>> IC693MDL940 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc