IC693MDL740 - 12/24 Volt DC Positive Logic Output Module (0.5 Amp, 16 Points)

This module is designed for the Series 90-30 PLC system and provides 16 output points organized into two groups of eight. Each group has its own common power output terminal. The module operates with positive logic, meaning it sources current to the loads from the user’s common or positive power bus. The connected device, such as motor starters, solenoids, or indicators, must be placed between the negative power bus and the module output. The power needed to operate these devices must be supplied by the user.

Key Features:

    16 output points, divided into two groups of eight outputs each.
    Operates with positive logic, sourcing current to the loads.
    Compatible with motor starters, solenoids, indicators, and other user-supplied devices.
    Requires a user-supplied power source to operate field devices.

LED Indicators:

    Green LEDs at the top of the module provide the ON/OFF status for each output point.
    The top row of LEDs, labeled A1 through A8, represents points 1 through 8, and the bottom row labeled B1 through B8 represents points 9 through 16.
    An insert is placed between the inside and outside surfaces of the hinged door, which provides circuit wiring information. The module is color-coded blue on the outside edge to indicate it is a low-voltage module.
    This module does not have fuses.

Technical Details:

    Rated Voltage: 12/24 volts DC.
    Output Voltage Range: 12 to 24 volts DC (+20%, -15%).
    Isolation:
        1500 volts between the field side and logic side.
        500 volts between output groups.
    Output Current:
        0.5 amps maximum per output point.
        2 amps maximum per common (per group).
    Inrush Current: Maximum of 4.78 amps for 10 ms.
    Output Voltage Drop: Maximum of 1 volt.
    Off-state Leakage: Maximum of 1 mA.
    On/Off Response Time:
        On: Maximum of 2 ms.
        Off: Maximum of 2 ms.

Power Consumption:

    Draws 110 mA from the 5-volt bus on the backplane when all outputs are ON.

This module is ideal for low-current applications requiring positive logic DC output control. It can be installed in any I/O slot of a 5 or 10-slot baseplate in a Series 90-30 PLC system, offering flexibility and reliable operation.

>> IC693MDL740 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc