IC693MDL733 - 12/24 Volt DC Negative Logic Output Module (0.5 Amp, 8 Points)

This module is designed for the Series 90-30 PLC system and provides 8 output points in one group. It operates with negative logic, meaning it sinks current from the loads to the user’s common or negative power bus. The connected device (such as motor starters, solenoids, or indicators) is connected between the positive power bus and the module output. The power required to operate these devices must be supplied by the user.

Key Features:

    8 output points, all grouped with a common power output terminal.
    Works with negative logic, meaning it sinks current from the loads.
    Compatible with motor starters, solenoids, indicators, and other user-supplied devices.
    Requires a user-supplied power source to operate the field devices.

LED Indicators:

    Green LEDs at the top of the module provide the ON/OFF status for each output point.
    The top row of LEDs is labeled A1 through A8, representing points 1 through 8.
    This module does not contain fuses.
    An insert is placed between the inside and outside surfaces of the hinged door. The insert provides circuit wiring information on the inside and allows for circuit identification information to be recorded on the outside. The module is color-coded blue on the left edge, indicating it is a low-voltage module.

Technical Details:

    Rated Voltage: 12/24 volts DC.
    Output Voltage Range: 12 to 24 volts DC (+20%, -15%).
    Isolation: 1500 volts between the field side and logic side.
    Output Current:
        0.5 amps maximum per output point.
        2 amps maximum per common.
    Output Voltage Drop: Maximum of 0.5 volts.
    Off-state Leakage: Maximum of 1 mA.
    On/Off Response Time: Maximum of 2 ms for both on and off states.

Power Consumption:

    Draws 50 mA from the 5-volt bus on the backplane when all outputs are ON.

This module is ideal for low-current applications that require negative logic DC output control. It can be installed in any I/O slot of a 5 or 10-slot baseplate in a Series 90-30 PLC system, providing reliable and flexible operation.

>> IC693MDL733 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc