IC693MDL731 - 12/24 Volt DC Negative Logic Output Module (2 Amp, 8 Points)

This module is designed for the Series 90-30 PLC system and provides 8 output points in one group. It operates with negative logic, meaning it sinks current from the loads to the user’s common or negative power bus. The connected device (e.g., motor starter, solenoid, or indicator) is connected between the positive power bus and the output of the module. The output characteristics make it compatible with a wide range of devices. The power to operate these devices must be supplied by the user.

Key Features:

    8 output points grouped with a common power output terminal.
    Works with negative logic, meaning it sinks current from the load to the common or negative power bus.
    Compatible with motor starters, solenoids, indicators, and other user-supplied devices.
    Requires an external power source supplied by the user to operate the field devices.

LED Indicators:

    Green LEDs (labeled A1 through A8) display the ON/OFF status of each output point.
    A red “F” LED indicates if any fuse is blown.
    The module contains two 5-amp fuses:
        The first fuse protects outputs A1 to A4.
        The second fuse protects outputs A5 to A8.

Technical Details:

    Rated Voltage: 12/24 volts DC.
    Output Voltage Range: 12 to 24 volts DC (+20%, -15%).
    Isolation: 1500 volts between the field side and the logic side.
    Output Current:
        2 amps maximum per output.
        4 amps maximum per fuse at 50°C (122°F).
        2 amps maximum per fuse at 60°C (140°F).
    Output Voltage Drop: Maximum of 0.75 volts.
    Off-state Leakage: Maximum of 1 mA.
    On/Off Response Time: Maximum of 2 ms for both on and off states.

Power Consumption:

    Draws 55 mA from the 5-volt bus on the backplane when all outputs are ON.

This module is ideal for applications requiring negative logic DC output control and provides protection for each output with fused circuits. It can be installed in any I/O slot of a 5 or 10-slot baseplate in a Series 90-30 PLC system, offering secure and flexible operation.

>> IC693MDL731 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc