IC693MDL655
The IC693MDL655 24 Volt DC Positive/Negative Logic Input Module:
This module provides 32 discrete input points divided into four isolated groups (A1 - A8, B1 - B8, C1 - C8, D1 - D8). Each group has its own common terminal, and the inputs can handle both positive and negative logic, operating at voltages up to 30V DC.
Key Details:
Positive logic: The input device sources current from the positive power bus to the input module.
Negative logic: The input device sinks current from the input module to the negative power bus.
When current flows into an input point, it registers as a logic 1 in the input status table (%I).
Isolation:
This module uses opto-couplers to provide isolation between the field side and the logic side (1500 volts), and also isolates the groups from one another (250 volts between groups).
LED Indicators:
The module has LEDs (labeled A1 - A8, B1 - B8, C1 - C8, D1 - D8) at the top to indicate the ON/OFF status of each input.
Power Supply:
Power for field devices can come from either a user-supplied source or the isolated +24V DC supply from the module’s I/O connectors.
You can use pre-wired cables (IC693CBL327 and IC693CBL328) or build your own to connect input devices to the module via 24-pin connectors on the front.
Key Specs:
Rated Voltage: 24V DC, Positive or Negative Logic
Input Voltage Range: 0 to 30V DC
Inputs per Module: 32 (four groups of eight)
Isolation: 1500V between the field and logic sides, 250V between groups
Input Current: 7.0 mA (typical ON current at 24V DC)
On-State Voltage: 11.5 to 30V DC
Off-State Voltage: 0 to 5V DC
On-State Current: Minimum 3.2 mA
Off-State Current: Maximum 1.1 mA
On/Off Response Time: Maximum 2 ms
Power Consumption:
195 mA (maximum) from the +5V bus on the backplane
224 mA (typical) from the +24V bus on the backplane or from a user-supplied 24V DC power source (all 32 inputs ON)
Wiring:
Connections are made through two 24-pin connectors located on the front of the module. The right connector is for Groups A and B, and the left connector is for Groups C and D. The user can purchase pre-wired cables or build custom cables as needed.
Application:
This module is suitable for industrial automation systems requiring multiple 24V DC inputs and works with both positive and negative logic configurations. It's designed for use with the Series 90-30 PLC system and fits into any I/O slot of a 5-slot or 10-slot baseplate.
The IC693MDL655 offers reliable performance with quick response times and high isolation, making it ideal for controlling a wide range of input devices in your PLC system.
>> IC693MDL655 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)