IC693MDL652

24 VDC Positive/Negative Logic, 32 Point Input (IC693MDL652)

This module is designed for the Series 90-30 PLC (Programmable Logic Controller) and provides 32 discrete input points. The inputs are arranged into four isolated groups (A1-A8, B1-B8, C1-C8, D1-D8). Each group has its own common connection and accepts either positive or negative logic inputs. The inputs can operate at voltage levels up to 30V.

    Isolation: The module provides isolation between the field side and logic side using opto-couplers. Additionally, each group of inputs is isolated from the others.
    LED Indicators: There are LED indicators (labeled A1 to D8) to show the ON/OFF status of each input.
    Operation: When current flows through an input point, it registers as a logic '1' in the input status table of the PLC. Power for field devices can either be supplied by the user or drawn from the isolated 24 VDC supply available at the module's I/O connectors.
    Connectors: The front of the module has two 24-pin male connectors (Fujitsu FCN-365P024-AU). The connector on the right side (front view) connects to groups A and B, while the connector on the left connects to groups C and D.
    Cable Options: You can use pre-wired cables (catalog numbers IC693CBL327 and IC693CBL328) or make your own cables as required by your application.

Technical Specifications:

    Input Voltage: 24 VDC (Positive/Negative Logic)
    Input Voltage Range: 0 - 30 VDC
    Isolation: 1500V between the field and logic side, 250V between groups
    Input Current: 7.0 mA at 24 VDC (typical)
    On-State Voltage: 11.5 - 30 VDC
    Off-State Voltage: 0 - 5 VDC
    Response Time: Maximum 2 ms for both On and Off
    Power Consumption: 195 mA maximum from the +5V backplane bus

With this information, you should have a clear understanding of how the module operates and how to make the connections. Also, be mindful of wiring and isolation requirements when working with this module.

>> IC693MDL655 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693MDL655 and other Ge-Fanuc modules are available for sale at Otomasyon AVM. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013