IC693MDL390

IC693MDL390 - 120/240 Volt AC Isolated Output Module (2 Amp, 5 Points)

This module is designed for the Series 90-30 PLC systems, providing 120/240 volt AC output with 5 isolated output points. Each output point has its own separate common, and the output circuits are isolated from each other in relation to the AC power source. This isolation allows each output circuit to operate on different phases of the AC supply or to be powered from the same supply.

Key features:

    Each output point can handle a maximum of 2 amps.
    Outputs are protected by 3-amp fuses, and each output has an RC snubber circuit to guard against transient electrical noise on the power line.
    The module supports a high inrush current, making it suitable for controlling inductive and incandescent loads.
    It requires an AC power source supplied by the user; it cannot be used with DC power.
    The status of each output is displayed via LED indicators located at the top of the module. Green LEDs indicate the ON/OFF status of each output, and the red "F" LED will light up if any fuse is blown.

Technical details:

    Output voltage range: 85 - 264 volts AC, 50/60 Hz.
    Isolation: 1500 volts between the field side and logic side, and 500 volts between each output.
    Output characteristics:
        Inrush current: Maximum of 25 amps for one cycle.
        Minimum load current: 100 mA.
        Output voltage drop: Maximum of 1.5 volts.
        Leakage current: Maximum 3 mA at 120 volts AC, and 6 mA at 240 volts AC.
        Response time: Maximum 1 ms for ON, and 1/2 cycle for OFF.

Power consumption: 110 mA drawn from the 5-volt bus on the backplane when all outputs are ON.

This module is ideal for applications requiring high inrush current, isolated outputs, and flexibility with different AC power phases. Each output being individually fused ensures protection and reliability for controlling a variety of loads.


>> IC693MDL390 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693MDL390 and other Ge-Fanuc modules are available for sale at Otomasyon AVM. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013