IC693CHS399
IC693CHS399 5-Slot Remote Baseplate
Cable Length Limitation:
The total length of the cable interconnecting all baseplates in a system using remote baseplates must not exceed 700 feet. This ensures that communication and power signals remain stable across the system.
CPU Dependency:
A remote baseplate cannot function independently. It must be connected to a system containing a CPU. The CPU can reside in either a PLC or a Personal Computer equipped with a Personal Computer Interface Card.
Isolation for Stability:
Remote baseplates include built-in isolation between the +5V logic supply used by the I/O modules and the supply for the interface circuit associated with the I/O Bus Expansion Interface. This isolation prevents problems related to unbalanced ground conditions, improving overall system stability.
Maximum Number of Remote Baseplates:
The number of remote baseplates allowed in a system depends on the CPU type:
CPUs 331, 340, 341 can support up to 4 remote baseplates.
CPUs 350 and higher can support up to 7 remote baseplates.
Expansion Connector:
Each remote baseplate is equipped with a 25-pin female D-type Expansion Connector, located on the right side. This connector allows it to be connected to other baseplates, extending the system’s capacity.
Available Sizes:
Remote baseplates are available in two sizes:
5-slot version (IC693CHS399)
10-slot version (IC693CHS392)
Intelligent Module Limitations:
Remote baseplates do not support certain intelligent option modules. The following modules must be installed in the CPU baseplate:
PCM (Programmable Coprocessor Module)
ADC (Analog to Digital Converter)
BEM330 (Bus Expansion Module)
CMM (Communications Module)
All other I/O and option modules can be installed in any type of baseplate, including remote baseplates.
Compatibility with Expansion Baseplates:
Remote baseplates share the same physical dimensions, power supply requirements, and support for I/O and option modules as Expansion baseplates, ensuring compatibility across different system configurations.
Rack Number Selection DIP Switch:
Each remote baseplate is equipped with a Rack Number Selection DIP switch. This switch allows the system to assign a unique rack number to the baseplate, enabling the CPU to identify and communicate with it.
General Overview of Remote Baseplates:
The IC693CHS399 5-Slot Remote Baseplate is designed to extend the capabilities of a Series 90-30 PLC system by adding additional slots for I/O and option modules in locations far from the CPU. However, it must be connected to a CPU baseplate for proper operation and communication. The built-in isolation prevents issues caused by ground imbalances, and the system can be extended to a significant distance with the 700-foot cabling limit.
>> IC693CHS399 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)