IC693CHS398

IC693CHS398 5-Slot Expansion Baseplate

The Ge Fanuc IC693CHS398 is a 5-slot expansion baseplate designed to extend the functionality of a Series 90-30 PLC system. These expansion baseplates allow additional I/O and option modules to be connected to the system beyond what the CPU baseplate can handle. However, there are key limitations and requirements for their use.
Key Features of the IC693CHS398 Expansion Baseplate:

    Cable Length Limitation:
        The total length of the cable connecting the expansion baseplates to the CPU baseplate must not exceed 50 feet (15 meters). This ensures proper communication and signal integrity between the baseplates.

    Dependence on a CPU:
        The expansion baseplate cannot function independently and must be connected to a system that contains a CPU. This CPU can be located in a PLC or a personal computer equipped with a Personal Computer Interface Card. It is essential for communication and data processing.

    Maximum Number of Expansion Baseplates:
        The number of expansion baseplates that can be used in a system is dependent on the CPU model:
            CPUs 331, 340, and 341 can support up to 4 expansion baseplates.
            CPUs 350 and higher can support up to 7 expansion baseplates.

    I/O Bus Expansion Connector:
        Each expansion baseplate features a 25-pin female D-type I/O Bus Expansion Connector located on the right side of the baseplate. This connector allows the baseplate to communicate with other expansion baseplates or the CPU baseplate.

    Available Versions:
        The IC693CHS398 is the 5-slot version of the expansion baseplate. There is also a 10-slot version available, the IC693CHS392.

    Intelligent Module Limitations:
        Some intelligent option modules cannot be used with expansion baseplates and must be installed directly in the CPU baseplate. These modules include:
            PCM (Programmable Coprocessor Module)
            ADC (Analog to Digital Converter)
            BEM330 (Bus Expansion Module)
            CMM (Communications Module)
        Other I/O and option modules, however, can be installed in any baseplate type, including expansion baseplates.

    Grounding Requirements:
        All expansion baseplates must be connected to a common ground for proper operation and safety. For specific grounding instructions, refer to the Installation chapter in the manual.

    Physical Characteristics:
        Expansion baseplates have the same physical dimensions as Remote baseplates, use the same types of power supplies, and support the same I/O and option modules. This ensures uniformity and compatibility across different baseplate types.

    Rack Number Selection DIP Switch:
        Each expansion baseplate is equipped with a Rack Number Selection DIP switch to assign a unique rack number to the baseplate. This setting allows the CPU to identify and communicate with the correct baseplate.

>> IC693CHS398 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693CHS398 and other Ge-Fanuc modules are available for sale at Otomasyon AVM. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013