IC693CHS393
IC693CHS393 10-Slot Remote Baseplate
Cable Length Limitation:
The total length of the cable connecting all baseplates in a system using remote baseplates must not exceed 700 feet. This distance limitation ensures proper communication and power distribution across the system.
CPU Dependency:
A remote baseplate cannot function independently. It must be connected to a system that has a CPU. The CPU can reside in a PLC or a Personal Computer equipped with a Personal Computer Interface Card.
Built-in Isolation for Stability:
The remote baseplate includes built-in isolation between the +5V logic supply used by the I/O modules in the remote baseplate and the supply for the interface circuit associated with the I/O Bus Expansion Interface. This isolation helps prevent issues related to unbalanced ground conditions, which can cause communication problems.
Maximum Number of Remote Baseplates:
The maximum number of remote baseplates allowed per system depends on the type of CPU used:
CPUs 331, 340, 341: Support up to 4 remote baseplates.
CPUs 350 and higher: Support up to 7 remote baseplates.
I/O Bus Expansion Connector:
Each remote baseplate is equipped with a 25-pin female D-type Expansion Connector, located on the right side. This connector allows the baseplate to be connected to other remote or CPU baseplates, thus extending the system’s capacity.
Available Sizes:
Remote baseplates come in two sizes:
5-slot version (IC693CHS398)
10-slot version (IC693CHS393), as shown in the image.
Intelligent Module Limitations:
Remote baseplates do not support certain intelligent option modules, which must be installed in the CPU baseplate. These modules include:
PCM (Programmable Coprocessor Module)
ADC (Analog to Digital Converter)
BEM330 (Bus Expansion Module)
CMM (Communications Module)
All other I/O and option modules can be installed in any baseplate, including remote baseplates.
Physical Compatibility:
Remote baseplates are the same physical size, use the same type of power supplies, and support the same I/O and option modules as Expansion baseplates, ensuring system compatibility.
Rack Number Selection DIP Switch:
Each remote baseplate includes a Rack Number Selection DIP switch, allowing you to assign a unique rack number to each baseplate within the system. This enables the CPU to correctly identify and communicate with the remote baseplates.
General Overview of Remote Baseplates:
The IC693CHS393 10-Slot Remote Baseplate extends the capacity of the Series 90-30 PLC system by providing additional slots for I/O and option modules in remote locations. However, the baseplate requires a connection to a CPU baseplate for communication. Its built-in isolation feature helps prevent ground imbalance problems, ensuring reliable performance in distributed systems.
>> IC693CHS393 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)