AD693CMM301
AD693CMM301 State Logic Serial Communications Module (SCM)
The AD693CMM301 provides two additional serial ports for the Series 90-30 State Logic PLC System, requiring a model 331 or 340 State Logic CPU. This module supports RS-232 on both ports and RS-485 on Port 2 only. The front panel features an OK LED, which indicates proper module operation once the internal self-test is completed. If the OK LED turns off while power is applied, check the module's seating in the baseplate and restart the system. If the LED remains off, it suggests a hardware failure, and the module should be sent for repair.
Connection and Cable Information:
The serial ports are accessible via a single front panel connector. To use both ports simultaneously, the IC693CBL305 Wye-type cable can be used to split the connection into two individual connectors. However, this cable is not recommended for use in multidrop networks, as it can cause signal reflections. For such networks, direct cabling to the SCM serial connector is advised.
The SCM, with its dual-port capabilities and robust communication features, enhances the connectivity of the Series 90-30 PLC system, making it an essential component for managing complex device communications in industrial automation.
>> AD693CMM301 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)