IC693ALG221
The IC693ALG221 4-Channel Analog Current Input Module is a great solution for technicians who need to convert analog current signals into digital signals for PLCs. Let’s dive into how it works:
Input Ranges:
This module offers two current ranges:
- 4 to 20 mA: In this range, 4 mA corresponds to a count of 0, and 20 mA equals a count of 32000. Each 1000 counts corresponds to 0.5 mA.
- 0 to 20 mA: If a jumper is added, this range is activated. In this range, 0 mA corresponds to 0 counts, while 20 mA still equals 32000 counts. Each 800 counts represents 0.5 mA, giving slightly better resolution.
Each channel has a conversion speed of half a millisecond. This means that all four channels are updated every two milliseconds, providing quick and accurate data for real-time monitoring. The data is stored in %AI registers in 16-bit format, ready for the PLC to process.
Protection and Isolation:
The module provides excellent protection. Even at reduced performance, it can handle up to 200V common-mode voltage. It uses optical isolation to prevent noise from the signal lines affecting the rest of the PLC system. Additionally, using twisted, shielded cables is essential to ensure clean signal reception, with the cable shield connected to either the COM or GND pins of the module.
LED Indicator and Power Supply:
There’s an LED on the front panel that indicates when the module is powered and functioning properly. The main power supply comes from the PLC's +24 VDC line, with an additional +5 VDC supply driving the isolation circuitry. The module can be installed in any I/O slot in a Series 90-30 PLC system, whether it's a 5-slot or 10-slot baseplate.
Performance Features:
- Resolution: It provides a resolution of 4 μA in the 4-20 mA range, meaning each digital count equals 4 μA.
- Accuracy: The module is highly accurate, with typical accuracy around ±0.1%, ensuring precise measurements.
- Isolation: It offers 1500V isolation between the field side and logic side, enhancing safety and signal quality.
- Update Rate: The module updates every 2 milliseconds, meaning it provides fast, real-time data.
Installation:
To install this module, you’ll need a 5- or 10-slot baseplate. The number of modules you can install depends on your PLC model. For example, a Model 311 can support only 4 modules, while a Model 351 can handle up to 51 modules.
Conclusion:
In summary, the IC693ALG221 is a reliable and precise module for converting analog current signals into digital data. It’s fast, accurate, and provides excellent isolation, making it a solid choice for any application where analog current monitoring is needed. This module won't let you down when it comes to handling analog inputs!
>> IC693ALG221 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)